Sorry if this is dumb question but I'm having big problems fitting my I/c piping on my ef hatch with ls motor.
The turbo compresser side is on the passenger side and the exhaust is on the driver side. Making my hot side piping a pain to run. So right now, I have just the compressor side to tb.

So my question is, can I just unbolt the four bolts and turn the whole assembly around where the compressor is now on the driver side and the exhaust on the passenger?
Will that mess anything up? Is there anything else that I would need to do? Besides maybe re clock the turbo.

Sorry and thanks.

Ps : also, will the rc 550 injecters from a h22 motor work with my obd 0 ls hatch?

 

yes it can be done if there is room. the turbo will sit higher or lower than mounted the other way. take that into effect. if theres room to do it all you have to do is re-clock the turbo.