xsboostid

ive seen it done a few times my ?'s are

how much boost will it hold
how long b4 it starts to leak
who on hmt has tryed it
anyway to help seal it up better

any help would be great

garn

why would you put a flexpipe inline with your charge piping? just use one of the ribbed silicone connectors if you need some flex..

90dx

I think he means the flex exh piping you can get at parts stores.I used some in my first setup and it held 6 psi fine.I didn't have it on for long as my lack of good fuel management blew the bottom end before I got to far .I used a DSM blowoff valve on the stock DSM pipe as I think mounting/welding in a blowoff on the flex would be tough.Sure was nice to work with though.

Darkelvis

I just want to know what an inteer coolr is.

Darkelvis

Thanks jago, I'll go see if i can pick up some inteer coolr on honda-tech.

nitrofish420

I've always kinda wondered how much pressure that flex piping ---- could hold. Not that I'd use it, but I'm just curious.

xsboostid

so it held to 6psi ? for how long? i think im going to rout it throw my stock air box i seen some one hide all there i/c pipes like that for the sleeper look im going to do it so i dont get all them wtf ?'s and looks

90dx

I only had that setup running for a couple hundred kms.It also was non intercooled so their was only two pieces of flex.If it didn't leak initially I don't see why that would change over time.I'm not in anyway recommending it but it would probably get you by for a little bit.Why don't you get some crush bend pipes there super cheap and come in a variety of sizes.Take a cruise down the exhuast aisle of your local Canadian tire,Pepboys,Autozone or whatever shitmart auto place you have locally.Probably costs no more than flex pipe and providing you have good connections guranteed not to leak.

bonestock94

plastidip coat it and it should hold boost fine...



http://www.dsmtuners.com/forums/show...threadid=98542