flange is mia

Reply Subscribe

Thread Tools

Search this Thread

01-31-2006, 08:30 AM

ssdelsolsi

0.5 BAR

Thread Starter

Join Date: Mar 2005

Location: mass

Posts: 166

flange is mia

where the hell do i get those two..
ebay = 0 awell as few other sites.... so if anyone can tell me where i can get them that would be GREAT :1

01-31-2006, 09:30 AM

clemsonteg

1.0 BAR

Join Date: Mar 2005

Posts: 250

Re: flange is mia

http://cgi.ebay.com/ebaymotors/GARRE...spagenameZWD1V

inlet flange

http://cgi.ebay.com/ebaymotors/turbo...spagenameZWDVW

outlet

01-31-2006, 09:45 AM

Tom-Guy

0.0 BAR

Join Date: Feb 2003

Posts: 0

Re: flange is mia

Good man. You suck 30% less than most people here with five times your post count.

01-31-2006, 10:11 AM

HMTguy

Guest

Posts: n/a

Re: flange is mia

Quote:

Originally Posted by clemsonteg

http://cgi.ebay.com/ebaymotors/turbo...spagenameZWDVW

outlet

Bingo

Quote:

Originally Posted by clemsonteg

http://cgi.ebay.com/ebaymotors/GARRE...spagenameZWD1V

inlet flange

This is good if you are ready to weld onto the flange. If you want the stock piece that just bolts up and you can put a coupler on, get the stock piece. Here is an auction I just found that has both pieces, it doesn't get any better than this really. Bid now!

http://cgi.ebay.com/ebaymotors/2-3-t...34659575QQrdZ1

01-31-2006, 10:46 AM

ssdelsolsi

0.5 BAR

Thread Starter

Join Date: Mar 2005

Location: mass

Posts: 166

Re: flange is mia

jagojon3 thanks alot dude... and i dont really get the 30% of people with 5times my post count suck thing? but thanks to everyone i just bid both peices jago posted about..

01-31-2006, 11:14 AM

bumblezc

3.0 BAR

Join Date: Sep 2003

Posts: 3,751

Re: flange is mia

I'm sorry, but EVERYTIME I see your Sig. I find it VERY annoying!!

01-31-2006, 11:38 AM

Tom-Guy

0.0 BAR

Join Date: Feb 2003

Posts: 0

Re: flange is mia

Quote:

Originally Posted by ssdelsolsi

jagojon3 thanks alot dude... and i dont really get the 30% of people with 5times my post count suck thing?

It was directed at clemsonteg. He was very helpful despite having a post count normally associated with asking basic Q's a search would answer. It had nothing to do with you beyond the fact he tried to help you out.

01-31-2006, 12:47 PM

95RedEX

1.5 BAR

Join Date: Aug 2004

Posts: 949

Re: flange is mia

I have that same turbo! Except mine's a lot older.

I bought the outlet that ClemsonTeg posted and used the flange and the first 1" of straight (before it bends). It kind of sucks because the flange you have on the turbo + the new flange + the new straight ends up being pretty long.

The cocked inlet that Jago posted is kind of fucked up too. It's a bitch to find a filter that will fit. I had to run a screen for awhile till I found one.

01-31-2006, 01:05 PM

splitime

1.0 BAR

Join Date: Apr 2004

Posts: 240

Re: flange is mia

Your other option... is to weld a piece of AL tubing to it on both flanges. We did this on my setup and its working out great.... of course there are also housings that would fit that and have the normal coupler'd outlet/inlet.