finished the turbo beater! Z6 engine swap and turboed!!(***track update***)
04-16-2004, 02:01 PM
#21
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 6,656
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
took it out for a drive this morning (no exhaust, no front bumper :P ) after figuring out the timing (with the A6 dizzy it was like 15deg retarded! good thing i have a chipped ECU, just added 15deg). seems to pull ok. how much boost? dont know, i dont have a boost gauge...but im guessing 5psi...
04-17-2004, 09:46 AM
#23
1.0 BAR
Join Date: Jan 2004
Posts: 255
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
1WVtec has been in the PM6 code for a long time. We never released our dual map vtec code to the PGMFI group but we did release the boost cut code so you may want to see if you can dig up a map with that feature in it.
-Michael
-Michael
04-18-2004, 01:04 AM
#25
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 6,656
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
like ***....i will try it again later though, maybe i didnt have the timing figured out yet.
but i dont like the ignition maps that are on that bin...or any of the PGMFI bins. the 4dr is running off a bin i created for my buddies SOHC ZC, just with 15deg more timing and some more fuel above 4400rpms...
but i dont like the ignition maps that are on that bin...or any of the PGMFI bins. the 4dr is running off a bin i created for my buddies SOHC ZC, just with 15deg more timing and some more fuel above 4400rpms...
04-20-2004, 01:46 AM
#27
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 6,656
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
------ oil leakin everywhere, loud as ----, and no front bumper....
think i fixed all three though
i put RTV all over...everything 
bought a 'cherry bomb' and tacked it into place for now, and put the bumper back on (****** weighs like 40lbs!). gonna make a couple more adjustments to the CRX fuel maps and take the PLX out and put it in the 4dr for some tuning 
hopefully bring it to the track in a couple weeks...
think i fixed all three though
i put RTV all over...everything bought a 'cherry bomb' and tacked it into place for now, and put the bumper back on (****** weighs like 40lbs!). gonna make a couple more adjustments to the CRX fuel maps and take the PLX out and put it in the 4dr for some tuning hopefully bring it to the track in a couple weeks...
04-27-2004, 05:11 PM
#30
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 6,656
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
well after swapping the dizzy out with a good one 
the car seemed to be running ok other than a slight oil leak (pretty sure its from the pan).
so i pull out onto the street hits 4psi in first
grab second...no boost oops haha forgot to put the C clip back on the WG arm and the arm fell off so we are hitting 4psi now...
oh yeah how am i reading boost? i bought another gauge...---- no! stole it from the CRX (and the dizzy) cuz its hibernating...
wait a second how is that being held there?...
while i was stealing ---- from the CRX i might need the PLX to do some tuning...
velcoed it to the dash and carefully hid the wires out of view :P also note the placement of the ECU, makes it a little easier to see when pulling chips (like when its dark out)... no comments on the radio, just send donations
the car seemed to be running ok other than a slight oil leak (pretty sure its from the pan). so i pull out onto the street hits 4psi in first
grab second...no boost oops haha forgot to put the C clip back on the WG arm and the arm fell off so we are hitting 4psi now...oh yeah how am i reading boost? i bought another gauge...---- no! stole it from the CRX (and the dizzy) cuz its hibernating...
wait a second how is that being held there?...
while i was stealing ---- from the CRX i might need the PLX to do some tuning...
velcoed it to the dash and carefully hid the wires out of view :P also note the placement of the ECU, makes it a little easier to see when pulling chips (like when its dark out)... no comments on the radio, just send donations
