finished the turbo beater! Z6 engine swap and turboed!!(***track update***)
lets get to the pics, cuz i know thats why your here ::)
http://www.newbieforces.com/files/civic1.JPG the beast http://www.newbieforces.com/files/d15_bird.JPG me right after i dropped the bitch on the ground, wtf you need a hoist for? i call it "pull a part style" cuz they dont have hoist there either. just undid the front and rear mounts, along with shift linkage, wires, etc, the removed the bottom bolts on driver and passenger side mounts... then lowered the car as far as the jack would go (so sitting on the jack) then grabbed the air gun (barrowed) and undid the last bolt on the drivers side, engine fell and hit radius arm :-\ then did the tranny side and it fell to the ground completely ;D http://www.newbieforces.com/files/D15_ground.JPG then jack it up as high as you can http://www.newbieforces.com/files/damnclose.JPG then side her out http://www.newbieforces.com/files/forsale.JPG FOR SALE ;) '88 D15B2 ~170K miles, good compression, good tranny, etc http://www.newbieforces.com/files/Z6_0.JPG now aint that so much sexier? '94 D16Z6, '91 DX tranny & flywheel, ACT XTSS clutch, HMT.com enigne mounts, B18A throttle body... http://www.newbieforces.com/files/axles.JPG k, this was gay... the bottom axle came out off the drivers side of the car. anything look wrong to you? well looked even worse in the car, was too small for the hub!!! :o and aboue half an inch too short. im pretty sure its for a late 80's Accord... luckly i still have my CRX axles around from when i did the B18 swap... http://www.newbieforces.com/files/Z6_6.JPG back to the swap. how did i get the motor in the air without a hoist? and without any help? long story... basicly you need a couple jacks and some wood handy, and its pretty much revese of taking it out... http://www.newbieforces.com/files/oilpan.JPG check that ---- out :-* http://www.newbieforces.com/files/o2bung.JPG O2 bung for my PLX Wideband controler, i will use the stock one on top of the manifold for the ECU and this one when tuning...and of course use the old broken ass O2 as a plug... http://www.newbieforces.com/files/Z6_4.JPG some charge pipe action http://www.newbieforces.com/files/Z6_3.JPG all finished, yeah...got to love Seattle! started to ------ rain about the time i finished up... btw 99% of this was competed by me ;D motor swap, turbo kit, welding, wiring (MPFI swap), etc so how does it run? how fast is it? etc? well i dont know :-X car was sitting for like 2weeks plus before the swap, so the ------ battery went dead! jumped it off with the Optima from the CRX and it was loud as ---- (its past 10pm) and ------ rich as hell cuz im running whatever was in the ECU that was in my garage ::) so it should be a turbo B18 tune. tomarrow morning i will go do some tuning hopefully before work... fell free to ask whatever question you have...and if you are running a Z6 on TE PLEASE email me the tune so i have something to start with :-* |
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
heh im using a mmr map on mine but it wont be boosted for another 3 weeks, so till then my PM6 wont be running a boost program. what are you using to activate your vtec?
|
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
umm not sure yet, going to be using a PS9 1wire TE setup...but i dont think its finished ???
|
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
good job...... you running OBD1-O??????
|
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
yeah its not done yet, they also are working on a 1 wire VTEC for hte PM6. hopefully there have that going soon lol ill just use my VAFC :P
|
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
Lookin good man. Is it just me, or is doing junkyard setups on a regular ongoing basis (in an apartment parking lot no less) the true sign of an HMT junky ;)
Ill send you Jays ZC tune minus an appropriate amount of fuel. You using a small turbo or your spare 60/63? |
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
thats very sweet. its definately a sleeper. i had to do the same thing with my engine, no one was around to help. oh well shows what u can do when u need your boost fix. haha, looks good!1 keep it up ;)
|
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
Very nice.
Gotta love the pics. 8) |
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
Originally Posted by leed
Lookin good man. Is it just me, or is doing junkyard setups on a regular ongoing basis (in an apartment parking lot no less) the true sign of an HMT junky ;)
Ill send you Jays ZC tune minus an appropriate amount of fuel. You using a small turbo or your spare 60/63? im running OBD0, TurboEdit2.0 |
Re:finished the turbo beater! Z6 engine swap and turboed!!(56K......HAHAHA)
Very nice job you did on your own. Best of luck with the tuning process :)
|
All times are GMT -5. The time now is 01:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands