HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Added (https://www.homemadeturbo.com/forced-induction-7/finally-road-few-problems-lots-questions-updated-pics-vids-added-82298/)

Skaterdudz02 09-27-2007 04:35 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 

Originally Posted by Smokey
That's my next step i think, however the motor was pulled from a running car, and nothing has been touched other than swapping the dizzy, and it's lined up on centre. I'm gonna try cap/rotor and new wires as the old ones are tired. If that doesn't solve my problem i think it's time for a Stock N/A b16a

I still disagree with your last statement.

You do that, and it will always trouble the ---- out of you until you finally find the problem.

Try this.

Go over the complete basics.

Check everything, all connections, vacuum lines, etc.

Maybe, you could try swapping in a stock ECU?

Pull the plugs. How do they look? Did you re-gap them? If so, did it help at .35?

talonator1488 09-27-2007 10:49 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Added
 
Check your base timing with a timing light.

Smokey 09-27-2007 11:21 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 
1 Attachment(s)
Well, i think i may have found the issue, taking the advice and starting with the basics, i started troublshooting it as if it wasn't boosted. First thing i did was take off the cap and have a look, here's what i found.

Attachment 23785

There is corrosion on the pins in the dist cap, and a weird almost salt like substance built up in the bottom. I went to the parts place to grab a new cap/rotor but i got the wrong one, i'll have to swap it out for the right one but i think this might be it, i guess this kinda ---- happens when a car sits for almost 4 years.

Skaterdudz02 09-28-2007 04:39 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 

Originally Posted by Smokey
Well, i think i may have found the issue, taking the advice and starting with the basics, i started troublshooting it as if it wasn't boosted. First thing i did was take off the cap and have a look, here's what i found.

http://i8.photobucket.com/albums/a6/...d/IM000449.jpg

There is corrosion on the pins in the dist cap, and a weird almost salt like substance built up in the bottom. I went to the parts place to grab a new cap/rotor but i got the wrong one, i'll have to swap it out for the right one but i think this might be it, i guess this kinda ---- happens when a car sits for almost 4 years.

Agreed, that may be the culprit, corrosion isn't good, but if you see a crack that will definitely tell you that it's no good.

It happens man, but I'm glad you are still hanging with it. :)

Have you changed the fuel filter?

ososlohatch 09-28-2007 05:19 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 
ohh my god i laughed that thing was so slow, keep us updated and hopefully you cant get it running right, dont give up just yet

Smokey 09-28-2007 07:02 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 
Well, i changed the ------- cap and rotor, and no difference whatsoever. No i haven't changed the fuel filter, i guess that's the next step.

trustnoone7935 09-28-2007 07:37 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Added
 
Damn don't give up you'll get.And a far N/A geos i'll NEVER go N/A again,I'm to addicted to boost >:D

Smokey 09-28-2007 11:23 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 
I'd love to be able to datalog and see what the ---- is going on here, but as per my thread in Engine management, i cannot for the life of me obtain any usefull info from Freelog other than TPS=-11 and o2=10

zebvaj 09-29-2007 12:33 AM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Added
 
I would like the guy said, get a stock ecu and plug it up with stock injectors to see if it fires and drive without boost to see if it works. If its the same ---- with the stock ecu than its probably timing. I don't know about TurboEdit but if that usually happens to me on Crome its usually the fuel multipliers. Like they say every motor is different...what worked for another guy might not work with your engine..just fiddle around with the tps enrich and offset multipliers if TurboEdit has it.

Smokey 09-29-2007 02:34 PM

Re: Finally on the road, few problems, lots of questions.(UPDated, Pics/Vids Add
 
Ok, well i just got off the phone with my buddy who originally owned the old motor, the engine is a B18b, however i'm running obd 0 dist and intake manifold etc. He said he thought the b18b timed up differently than the b18a, so if i'm using PR4 maps from a b18a, then the timing is obviously going to be off. Does anyone have a hanes book for a b18a, that can gear me up with timing marks and instructions?


All times are GMT -5. The time now is 11:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands