Finally Boosted, Pics inside *56k beware*
Thread Starter
0.5 BAR
Joined: Jun 2003
Posts: 88
Finally Boosted, Pics inside *56k beware*
Here's some pics of my setup, I could make a video if anyone is interested.
'90 CRX Si d16a6 stock internals
HF Manifold with adapter plate
T25 2nd gen eclipse turbo boosting 8psi
Stealthmode's oil feed/drain lines
2.5 inch piping
Non-intercooled for now
No downpipe for now
HKS BOV - ghetto mounted
450cc Injectors
AEM FPR
Ghettodyne chipped ecu
'90 CRX Si d16a6 stock internals
HF Manifold with adapter plate
T25 2nd gen eclipse turbo boosting 8psi
Stealthmode's oil feed/drain lines
2.5 inch piping
Non-intercooled for now
No downpipe for now
HKS BOV - ghetto mounted
450cc Injectors
AEM FPR
Ghettodyne chipped ecu
3.0 BAR
Joined: Mar 2003
Posts: 21,468
Re:Finally Boosted, Pics inside *56k beware*
OMG 
Clean that ---- up a bit. How does it run? Congratulations. 
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Clean that ---- up a bit. How does it run? Congratulations. __________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
0.5 BAR
Joined: Jun 2003
Posts: 88
Re:Finally Boosted, Pics inside *56k beware*
Yeh, I know it's dirty, but until I can get the car painted, it's gonna stay dirty/sleeper look. Also, it pulls hard as hell, way more than I expected, and in 5th gear on the expressway, I can just part throttle it and pass people easily. Also, I can burn the tires from 1st to 3rd gear.
Administrator
Joined: Dec 2002
Posts: 13,988
Re:Finally Boosted, Pics inside *56k beware*
-Broken exhaust stud
-uncut Zip ties
-No intercooler
-Mismatched IC pipes
-Kinked upper rad hose
-Electrical taped connections
-No coolant lines going to turbo
-Dirty as hell
That right their gets the ultimate low-budget HMT Setup Award.
I'm diggin it!
-uncut Zip ties
-No intercooler
-Mismatched IC pipes
-Kinked upper rad hose
-Electrical taped connections
-No coolant lines going to turbo
-Dirty as hell
That right their gets the ultimate low-budget HMT Setup Award.
I'm diggin it!
1.0 BAR
Joined: Jul 2003
Posts: 353
Re:Finally Boosted, Pics inside *56k beware*
yikes...scary mesh on the compressor! 
You need a filter. Oh, and an intercooler if you're running 8 psi...
looking good though - that's the epitome of HMT right there. congrats and keep us updated!
You need a filter. Oh, and an intercooler if you're running 8 psi...
looking good though - that's the epitome of HMT right there. congrats and keep us updated!
Thread Starter
0.5 BAR
Joined: Jun 2003
Posts: 88
Re:Finally Boosted, Pics inside *56k beware*
Well, the hose isn't kinked, I think it's original though. I need to get my BOV mounted on a bigger pipe 
. The electrical tape is just there to cover up the connectors. I'll clean that up one day. Anyone got any recommendations to clean out the engine bay? They use salt on the roads here in the winter and it really takes a toll on just about everything. Oh yeh, the stud it broken and I couldn't get it out, so I put some high temp rtv around it and it sealed nicely. I need a downpipe, but I don't really care, I've driven passed cops and haven't gotten pulled over yet.
. The electrical tape is just there to cover up the connectors. I'll clean that up one day. Anyone got any recommendations to clean out the engine bay? They use salt on the roads here in the winter and it really takes a toll on just about everything. Oh yeh, the stud it broken and I couldn't get it out, so I put some high temp rtv around it and it sealed nicely. I need a downpipe, but I don't really care, I've driven passed cops and haven't gotten pulled over yet.
