Finally Boosted, Pics inside *56k beware*
 

Here's some pics of my setup, I could make a video if anyone is interested.

'90 CRX Si d16a6 stock internals
HF Manifold with adapter plate
T25 2nd gen eclipse turbo boosting 8psi
Stealthmode's oil feed/drain lines
2.5 inch piping
Non-intercooled for now
No downpipe for now
HKS BOV - ghetto mounted
450cc Injectors
AEM FPR
Ghettodyne chipped ecu

http://www.highrev.net/images/Marti/Turbo/DSCF0001.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0002.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0005.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0008.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0010.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0011.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0017.jpg
http://www.highrev.net/images/Marti/Turbo/DSCF0018.jpg

Re:Finally Boosted, Pics inside *56k beware*
 

OMG :-X Clean that ---- up a bit. How does it run? Congratulations. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Finally Boosted, Pics inside *56k beware*
 

Yeh, I know it's dirty, but until I can get the car painted, it's gonna stay dirty/sleeper look. Also, it pulls hard as hell, way more than I expected, and in 5th gear on the expressway, I can just part throttle it and pass people easily. Also, I can burn the tires from 1st to 3rd gear.

Re:Finally Boosted, Pics inside *56k beware*
 

-Broken exhaust stud
-uncut Zip ties
-No intercooler
-Mismatched IC pipes
-Kinked upper rad hose
-Electrical taped connections
-No coolant lines going to turbo
-Dirty as hell

That right their gets the ultimate low-budget HMT Setup Award.

I'm diggin it! :)

Re:Finally Boosted, Pics inside *56k beware*
 

yikes...scary mesh on the compressor! :o

You need a filter. Oh, and an intercooler if you're running 8 psi...

looking good though - that's the epitome of HMT right there. congrats and keep us updated!

Re:Finally Boosted, Pics inside *56k beware*
 

Well, the hose isn't kinked, I think it's original though. I need to get my BOV mounted on a bigger pipe ;D. The electrical tape is just there to cover up the connectors. I'll clean that up one day. Anyone got any recommendations to clean out the engine bay? They use salt on the roads here in the winter and it really takes a toll on just about everything. Oh yeh, the stud it broken and I couldn't get it out, so I put some high temp rtv around it and it sealed nicely. I need a downpipe, but I don't really care, I've driven passed cops and haven't gotten pulled over yet.

Re:Finally Boosted, Pics inside *56k beware*
 

get some degreaser, spray it on the bock and let it sit for 15 minutes, then douse it with warm water. or get a pressure sprayer at a car wash place.

Re:Finally Boosted, Pics inside *56k beware*
 

are you getting any detonation at 8psi? that sweet, if it works forget about the ic.

Re:Finally Boosted, Pics inside *56k beware*
 

It looks like your vacuum hose is about to fall off your BOV. Pretty cool setup though.

Stan

Re:Finally Boosted, Pics inside *56k beware*
 

Sexy.. hmt <3 ;D