Re: F22B1 Turbo Plans - T3 60 trim
 

If ya loose the power steering cooler, or relocate it.... you can route the pipe tight down against the radiator, and after enlarging the hole...run the pipe throuh the radiator core support to the IC... I dont have any GOOD pics how i did it, hope it makes sencse!!! I used a 90 degree silicone coupler straight out of the hot side of the intercooler which ran to a 70 degree bend through my enlarged cooler hose hole, and that shot me straight up the side of the radiator...right against it. from there another 90 degree silicone coupler to my top pipe. from ther you can see the pics of the upper pipe i made. Re clocked the turbo compressor back a bit. You can keep your window washer and everything. just either loop a hose for the removed ps cooler, or relocate it. i relocated it on top of my ic

Hope these help

http://i44.photobucket.com/albums/f4...yvtec/int6.jpg
http://i44.photobucket.com/albums/f4/bigdaddyvtec/k.jpg
http://i44.photobucket.com/albums/f4/bigdaddyvtec/j.jpg
http://i44.photobucket.com/albums/f4/bigdaddyvtec/w.jpg
http://i44.photobucket.com/albums/f4/bigdaddyvtec/d.jpg
http://i44.photobucket.com/albums/f4...yvtec/int7.jpg

Re: F22B1 Turbo Plans - T3 60 trim
 

if you move the oil cooling lines on the driver side of the radiator you can fit a 2 - 2.5" pipe down there. i will try to get some pics