F22A Turbo Project (Questions) - HomemadeTurbo - DIY Turbo Forum
HomemadeTurbo - DIY Turbo Forum


Forced Induction Custom FI Setup Questions

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 01-09-2003, 02:55 PM   #1  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 116
Default F22A Turbo Project (Questions)

Hi guys, I am fairly new here but have been reading about the homebrew turbo scene for a few months now.
In spring I plan to build a turbo setup for my honda prelude S (shares the motor with an accord, the F22A1 for those that are wondering).
Now I found out that the mitsubishi manifolds bolt up to my engine after re-drilling a bolt hole. So I will probably be using a manifold and turbo off an eclipse/laser/talon.
This will be very much on the cheap side as this is just an experiment, I was planning an H22 swap but I want to try out the turbo thing first and see how it goes.
Is it safe for me to run about 5-7psi daily on basically stock injectors and fuel delivery?
Can anyone give me a rough estimation of how much hp I would be making at about 5psi?
(I know this depends on MANY variables but someone with some experience must be able to give me some #'s) The motor puts out about 135hp and 140ft/lbs stock.
Anybody have any suggestions on neccesary, yet cheap parts that will save my engine?
Anton is offline   Reply With Quote
Old 01-09-2003, 03:14 PM   #2  
1.0 BAR
 
Join Date: Dec 2002
Posts: 242
Default Re:F22A Turbo Project (Questions)

If i'm not mistaken, the F22 is very similar to the sohc D-series motors.. just bigger =D
in fact, the local dealer has an F22 on a stand in the showroom, and I thought it was a D16Y8 just at a glance =P

if it's anything like the D's 5-7psi is very do-able

-Henry
DJHankB is offline   Reply With Quote
Old 01-09-2003, 03:33 PM   #3  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 116
Default Re:F22A Turbo Project (Questions)

do you think 5-7psi is safe on a stock fuel system?
Anton is offline   Reply With Quote
Old 01-09-2003, 07:35 PM   #4  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 116
Default Re:F22A Turbo Project (Questions)

Anybody knowledgeable wanna tune in?
Anton is offline   Reply With Quote
Old 01-09-2003, 09:03 PM   #5  
0.5 BAR
 
Join Date: Dec 2002
Posts: 121
Default Re:F22A Turbo Project (Questions)

^bro, everyone here knows there ----...
buuut there is a dude bud on honda-tech with a boosted F22...
he's been running it for a bit, and he says with no probs...
it's good to do as a learning experience.
Robo_Wop is offline   Reply With Quote
Old 01-10-2003, 12:21 AM   #6  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:F22A Turbo Project (Questions)

Just like any turbo system, doesnt matter what car or what engine. You are going to need some type of fuel managment. Just bolting a turbo and raming 6psi on your stock fuel system will work, but you wont get the power and relibility you are looking for. At the bare minimum a FMU.

F&H series motors are pretty strong, and can take some good boost if managed correctly. They have a closed deck design as well.

Jeff
HMT-Admin is offline   Reply With Quote
Old 01-10-2003, 12:33 PM   #7  
0.5 BAR
Thread Starter
 
Join Date: Jan 2003
Posts: 116
Default Re:F22A Turbo Project (Questions)

Thanks for the input guys. Yeah this is gonna be a fun learning experience.
Robo Wop, do you know any details about the guys setup?
Anton is offline   Reply With Quote
Old 01-11-2003, 09:31 AM   #8  
0.5 BAR
 
Join Date: Dec 2002
Posts: 121
Default Re:F22A Turbo Project (Questions)

i can't really remember...
go to honda-tech.com and do a search on the boosted f22...u'll come up with some hits...
send an im to him and chat it up
Robo_Wop is offline   Reply With Quote
Old 08-25-2018, 06:34 PM   #9  
0.0 BAR
 
Join Date: Aug 2018
Posts: 1
Default F22a turbo project

I am currently installing a turbo on my car it's a 93 Honda accord.. I've been just piecing it together as I can... I used a 2001 Mitsubishi eclipse turbo manifold and Turbo on my car and just want some I site or anything anyone thinks will help me!
Jeremy Juntunen Jr. is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
HMT F22a turbo Prelude Project!! w/ vids and new pics!!! talonator1488 Forced Induction 34 04-09-2008 10:22 PM
Mazda Turbo on F22A? 89.5Mazccordturbo Forced Induction 4 11-28-2004 12:52 PM
F22A turbo throwing MAP code adamsonem Forced Induction 8 09-08-2004 03:13 PM
f22a block with f22b1 head turbo phenix Forced Induction 6 03-04-2004 08:31 PM
Accord Turbo Manifold F22a* and H23* Turbo90Accord4DR Turbo Parts For Sale 4 11-04-2003 04:41 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 09:22 PM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.