F22A Turbo Project (Questions)
 

Hi guys, I am fairly new here but have been reading about the homebrew turbo scene for a few months now.
In spring I plan to build a turbo setup for my honda prelude S (shares the motor with an accord, the F22A1 for those that are wondering).
Now I found out that the mitsubishi manifolds bolt up to my engine after re-drilling a bolt hole. So I will probably be using a manifold and turbo off an eclipse/laser/talon.
This will be very much on the cheap side as this is just an experiment, I was planning an H22 swap but I want to try out the turbo thing first and see how it goes.
Is it safe for me to run about 5-7psi daily on basically stock injectors and fuel delivery?
Can anyone give me a rough estimation of how much hp I would be making at about 5psi?
(I know this depends on MANY variables but someone with some experience must be able to give me some #'s) The motor puts out about 135hp and 140ft/lbs stock.
Anybody have any suggestions on neccesary, yet cheap parts that will save my engine?

Re:F22A Turbo Project (Questions)
 

If i'm not mistaken, the F22 is very similar to the sohc D-series motors.. just bigger =D
in fact, the local dealer has an F22 on a stand in the showroom, and I thought it was a D16Y8 just at a glance =P

if it's anything like the D's 5-7psi is very do-able

-Henry

Re:F22A Turbo Project (Questions)
 

do you think 5-7psi is safe on a stock fuel system?

Re:F22A Turbo Project (Questions)
 

Anybody knowledgeable wanna tune in? :)

Re:F22A Turbo Project (Questions)
 

^bro, everyone here knows there ----...
buuut there is a dude bud on honda-tech with a boosted F22...
he's been running it for a bit, and he says with no probs...
it's good to do as a learning experience.

Re:F22A Turbo Project (Questions)
 

Just like any turbo system, doesnt matter what car or what engine. You are going to need some type of fuel managment. Just bolting a turbo and raming 6psi on your stock fuel system will work, but you wont get the power and relibility you are looking for. At the bare minimum a FMU.

F&H series motors are pretty strong, and can take some good boost if managed correctly. They have a closed deck design as well.

Jeff

Re:F22A Turbo Project (Questions)
 

Thanks for the input guys. Yeah this is gonna be a fun learning experience.
Robo Wop, do you know any details about the guys setup?

Re:F22A Turbo Project (Questions)
 

i can't really remember...
go to honda-tech.com and do a search on the boosted f22...u'll come up with some hits...
send an im to him and chat it up

F22a turbo project
 

I am currently installing a turbo on my car it's a 93 Honda accord.. I've been just piecing it together as I can... I used a 2001 Mitsubishi eclipse turbo manifold and Turbo on my car and just want some I site or anything anyone thinks will help me! https://cimg1.ibsrv.net/gimg/www.hom...ed059699bb.jpg