Eagle rods and Je pistons in a B18b
#3
Re: Eagle rods and Je pistons in a B18b
Originally Posted by tranceminister
You will be fine with the stock sleeves but make sure you have a good tuner.
yep. this is a good time to get some headstuds as well, and do things like timing belt/water/oil pump, thermostat, any other little things like that.
#4
Re: Eagle rods and Je pistons in a B18b
Nonsense, go for 350-400 whp. Engine life will be approx two oil changes, and with all that heat cooking the oil they won't be the every 3000 mile variety. You'll also need racegas or water injection at that point to cool things off.
Wanting your engine to last is irrelevant when you can make anybody sitting in your passenger's seat gibber in terror and try to cram themselves into the floorboard! Think about it.
Wanting your engine to last is irrelevant when you can make anybody sitting in your passenger's seat gibber in terror and try to cram themselves into the floorboard! Think about it.
#6
Re: Eagle rods and Je pistons in a B18b
Originally Posted by Joseph Davis
Nonsense, go for 350-400 whp. Engine life will be approx two oil changes, and with all that heat cooking the oil they won't be the every 3000 mile variety. You'll also need racegas or water injection at that point to cool things off.
Wanting your engine to last is irrelevant when you can make anybody sitting in your passenger's seat gibber in terror and try to cram themselves into the floorboard! Think about it.
Wanting your engine to last is irrelevant when you can make anybody sitting in your passenger's seat gibber in terror and try to cram themselves into the floorboard! Think about it.
#7
Re: Eagle rods and Je pistons in a B18b
At those power levels, I'd tear the suspension out from under the car before two oil changes... that is if the transmission didn't fall out from the defective ED chassis transmission mounts tear off from the frame rail in a real power situation. Maybe you picked one of the easier, roomier chassis, though
#8
Re: Eagle rods and Je pistons in a B18b
I'm installing the exact same pistons and rods in my B18A1,but my pistons are a 10.1 cr so I'll have to get it tuned to run some higher boost safely. But I'm gonna be running two rhb5's and I want to run 15psi but thats gonna be pushing the limits of these lil snails. It's gonna run me basically 100 for all new bearings(rod,thrust) major gaskets, timing belt. I've got connections otherwise it'd be like double that.
#9
Re: Eagle rods and Je pistons in a B18b
block fill it and you can run 15psi and at the track run more and have no problems with a good tuner im doing the same build but filling it and im going over with the bore a little to 300hp is a lot what size turbo you running
Thread
Thread Starter
Forum
Replies
Last Post
97spydagst
Turbo Parts For Sale
30
05-28-2006 01:30 PM
88crx91integra
Turbo Parts For Sale
12
10-14-2003 03:14 PM