dsm problems....
10-22-2004, 02:05 PM
#14
3.0 BAR
Join Date: Jul 2004
Posts: 3,207
Re:dsm problems....
Originally Posted by ghettoturbo
Originally Posted by turboDA6
if the flapper is closed it will generate 0 boost... no matter how hard u try. not even barely 1... close the flapper arm and check the wastegate to make sure its holding it closed...
10-23-2004, 02:55 AM
#17
3.0 BAR
Join Date: Jul 2004
Posts: 3,207
Re:dsm problems....
Originally Posted by trebor_nordap
Originally Posted by trebor_nordap
check to see if the gasket betweeb the compressor housing and the center section is good or is there at all. you'll have to remove the compressor housing.
10-24-2004, 09:33 PM
#18
3.0 BAR
Join Date: Jul 2004
Posts: 3,207
Re:dsm problems....
look what i found for you... from the man him self
Originally Posted by AbaZ
running out of steam at 6100? I'm telling you guys, its those gay *** wastegate actuators on those things that make the 14b's feel like ----. Take the wastegate actuator off, throw a carb spring on and just go drive it, tell me what you think.
10-30-2004, 10:06 PM
#19
0.0 BAR
Join Date: Oct 2004
Posts: 9
Re:dsm problems....
Originally Posted by turboDA6
if the flapper is closed it will generate 0 boost... no matter how hard u try. not even barely 1... close the flapper arm and check the wastegate to make sure its holding it closed...
10-31-2004, 05:34 AM
#20
3.0 BAR
Join Date: Jul 2004
Posts: 3,207
Re:dsm problems....
Originally Posted by dsm
Originally Posted by turboDA6
if the flapper is closed it will generate 0 boost... no matter how hard u try. not even barely 1... close the flapper arm and check the wastegate to make sure its holding it closed...
