I got a set of DSM 390cc injectors and Ive been searching the forums for fitment on the orings for honda injectors but my question is --Do you dremel out the top o-ring or both because when I took out my oem 240cc or whatever they are in the f22a1 engines I pulled out two o-rings for each injector- 1 is soft on top the other is harder on bottom. Also, how far do you dremel them down depth wise because the injector has to be the same placement as the stock fits right? and Do the honda clips just plug right into the dsm injectors?

Any pics? Every link I find in homemadeturbo is for some other forum im not in.

 

surely you passed this right?

https://www.homemadeturbo.com/tech_p...dsm_injectors/

 

Yeah I read it but my setup is different, stock that is. I have 2 washers in each injector port. IDK, I guess Ill try and measure the stock injector with both o-rings then compare it to the DSM ones. then drill out what I need to to make it flush like stock. I just dont want to ---- it up.

Do the stock honda clips (mine are on a f22a1 engine) work with the DSM injectors.