HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   dsm 450 injector install (https://www.homemadeturbo.com/forced-induction-7/dsm-450-injector-install-38079/)

whiterice 04-20-2005 11:49 AM

Re: dsm 450 injector install
 
i prefer the resistor box.
https://www.homemadeturbo.com/forum/...9608#msg349608

Paul99EX 04-20-2005 01:42 PM

Re: dsm 450 injector install
 
what do you mean about using a drimmel on the injectors? what do you need to drimmel?? pref an mspaint pic please ;)

koreanwilcox 04-20-2005 01:50 PM

Re: dsm 450 injector install
 

Originally Posted by Paul99EX
what do you mean about using a drimmel on the injectors? what do you need to drimmel?? pref an mspaint pic please ;)

I didn't use a dremel on mine, I just used a sharp knife... I'll try to draw a picture reall quick... it's a small tab on the inside of the clip...

rsmith2786 04-20-2005 01:51 PM

Re: dsm 450 injector install
 
Although i have mad sicc ms paint skills i dont have time right now. Basically sand down the inside of the seal where the injectors slide in and make it a little bigger. Just have a 450cc injector with you when you do this so you can test for a snug fit and keep sanding till you get there.

koreanwilcox 04-20-2005 01:58 PM

Re: dsm 450 injector install
 
Okay, as far as the clips go, here's what you have to modify...

This is a super fantastic drawing of an injector, DSM 450 if you couldn't tell, showing the part you have to shave off so it works with the stock clips...

https://img.photobucket.com/albums/v...ilcox1/dsm.jpg

Good thing I'm bored right now...

Oh, and you have to bore out the seals, but that's so self-explainatory it doesn't deserve a super fantastic drawing...

Paul99EX 04-20-2005 02:38 PM

Re: dsm 450 injector install
 
so im shavin off a little tab off the clips? im still confused, haha, i just dont wanna fuckup my injectors

Donald125 04-20-2005 02:59 PM

Re: dsm 450 injector install
 
you shave that little bump ON the injector itself.

ghettoturbo 04-20-2005 03:23 PM

Re: dsm 450 injector install
 
cut them till they fit, end of story

koreanwilcox 04-20-2005 04:02 PM

Re: dsm 450 injector install
 

Originally Posted by Paul99EX
so im shavin off a little tab off the clips? im still confused, haha, i just dont wanna fuckup my injectors

You don't have to modify the clips... just shave the circled tab off the actual injector...

If you had the clips and injectors in your hands, it would be pretty obvious what part you need to modify... you won't mess up your injectors by doing this, it's nothing but a plastic tab that you have to remove..


Paul99EX 04-20-2005 08:46 PM

Re: dsm 450 injector install
 
this thing? (sorry pics kinda blurry)

[img width=600 height=500]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wODg2MzMyNnM0MTNkZmQzMXk1NDE%3D.jpg[/img]


All times are GMT -5. The time now is 11:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands