dsm 16g
#4
Re: dsm 16g
yes u can convert to external wg. pretty simple, jus buy the dp flange that blocks the wg hole and get a mani with external wg flange on it.. or u can do what some people do, i kno some people who run there external wg in the location of the internal wg dump, heard it works pretty well. stock psi depends what car exactly it came from, could be anywhere from 7 to 14psi. u can turn it up with a boost controler.
#6
Re: dsm 16g
Originally Posted by splitime
I'm running an external audi gate off the top of my HF manifold. I just removed the internal gates vacuum source and its all working fine.
#7
Re: dsm 16g
Originally Posted by turboDA6
Originally Posted by splitime
I'm running an external audi gate off the top of my HF manifold. I just removed the internal gates vacuum source and its all working fine.
So far with the ebc I'm holding steady boost without issue on the external. I'll probably get around to blocking off the internal port at some point when i get around to porting the turbo. Plus when i was using a manual controller before, i could just use a free solenoid to run 2 boost levels(interal = low boost, and external = high boost.... all on one switch)... so its kinda nice.
Thread
Thread Starter
Forum
Replies
Last Post
TTC
Forced Induction
1
11-15-2006 01:46 PM