Downpipe Flange
#1
Downpipe Flange
im going to order a new exhaust flange for my t3 .42 .48 from Bmcrace.com but i dont know which flange i need... there are five bolts on the turbo so i'm left with two options:
3 Garrett (Mercedes) 5 bolt $24 ea
T3 Turbonetics (Precision and newer Garrett) 5 bolt $22 ea
how can i know which one is for my turbo?
here is a pic of my turbo's exhaust side:
[img height=450 width=600]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE2NjAxNTZzNDEzZGZkMzF5NTQx.jpg[/img]
i hope it helps
ill remove the one installed at the moment(seen in the picture) because its too thick leaving me no enough room to use a better downpipe
3 Garrett (Mercedes) 5 bolt $24 ea
T3 Turbonetics (Precision and newer Garrett) 5 bolt $22 ea
how can i know which one is for my turbo?
here is a pic of my turbo's exhaust side:
[img height=450 width=600]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE2NjAxNTZzNDEzZGZkMzF5NTQx.jpg[/img]
i hope it helps
ill remove the one installed at the moment(seen in the picture) because its too thick leaving me no enough room to use a better downpipe
#6
Re: Downpipe Flange
I'm guessing here, but I assume your going to be using the internal gate right? well if thats so, you cant use a 5 bolt flange and make a dual tube split, because the swing valve is apart of the stock 5 bolt housing.
We just did a setup with a internal gate T3 setup, and the flange you need is the 3bolt 2.5
You can get them here:
http://www.atpturbo.com/Merchant2/me...egory_Code=FLS
Hope that helped,
Jeff
We just did a setup with a internal gate T3 setup, and the flange you need is the 3bolt 2.5
You can get them here:
http://www.atpturbo.com/Merchant2/me...egory_Code=FLS
Hope that helped,
Jeff
#7
Re: Downpipe Flange
Thread
Thread Starter
Forum
Replies
Last Post
pa2play
Turbo Parts For Sale
3
10-03-2005 09:15 AM
turbo2k
Forced Induction
2
05-18-2005 09:06 PM