Downpipe Flange
im going to order a new exhaust flange for my t3 .42 .48 from Bmcrace.com but i dont know which flange i need... there are five bolts on the turbo so i'm left with two options:
3 Garrett (Mercedes) 5 bolt $24 ea T3 Turbonetics (Precision and newer Garrett) 5 bolt $22 ea how can i know which one is for my turbo? here is a pic of my turbo's exhaust side: [img height=450 width=600]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE2NjAxNTZzNDEzZGZkMzF5NTQx.jpg[/img] i hope it helps ill remove the one installed at the moment(seen in the picture) because its too thick leaving me no enough room to use a better downpipe |
Re: Downpipe Flange
just an ordinary plane jane 5 bolt t3 flange.
|
Re: Downpipe Flange
You will need a dual tube split style DP. That may be a task to make.
|
Re: Downpipe Flange
there isnt an ordinary one in the options of bmcrace or maybe there is and i dont know why it could be related to a mercedes?
|
Re: Downpipe Flange
Originally Posted by CSaddict
You will need a dual tube split style DP. That may be a task to make.
|
Re: Downpipe Flange
I'm guessing here, but I assume your going to be using the internal gate right? well if thats so, you cant use a 5 bolt flange and make a dual tube split, because the swing valve is apart of the stock 5 bolt housing.
https://www.homemadeturbo.com/turbo_...j/CIMG0093.JPG We just did a setup with a internal gate T3 setup, and the flange you need is the 3bolt 2.5 You can get them here: http://www.atpturbo.com/Merchant2/me...egory_Code=FLS Hope that helped, Jeff |
Re: Downpipe Flange
|
All times are GMT -5. The time now is 04:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands