I jsu tfinger smear a bit around the whole thing and in the corners, I know it might not need it but better safe then sorry!

 

I made the mistake of Hondabonding my whole gasket, lol that ---- did NOT wanna come off the next time around.
Just the corners/hump is fine.

I stoped Hondabonding the gear side cam seals cause' the seals would tear before the bond would. Its good ----, but VERY expensive. The anabolic SP? red ---- from napa is also a very good, acts the same. Its also pretty pricey as well, but worth it IMHO. Oil leaks are gay.

 

i asume you guys are useing the honda bond on the turbo oil line drain flange ?

Did any one try using this way ?
i used drilled and taped a hole in the pan with 3/8 NPT tap and die set and jsut screwed in a 3/8 NTP fitting with a 3/8 hose barb on the end of it . no leaks no hondabond ,

97cents at boat US for the fitting its in the fuel fittings isle

 

i used to use some silicone gasket sealer stuff from nappa on my valve cover gasket and i noticed a slight bit of leakage. Now I only use hondabond and there is no leakage at all