different turbos different forces?
Guest
Posts: n/a
different turbos different forces?
I was wondering if different turbos put different forces on your engine is 7psi on a t25 the same as having 7psi on a 16g is it the cfm's that blow motors or the psi. I know its all about tuning. just want to clear this up. running on a 2000 si dont want to blow it
3.0 BAR
Joined: Dec 2002
Posts: 3,828
Re:different turbos different forces?
boost doesn't blow up your car...it could blow head gaskets...
Detonation...brakes ringlands, sleeves and damage rod bearings and then the rod goes, or making to much power could snap the rod's.
And yes 7psi on a 16G is different than 7psi on a T25...
It has to do with the CFM's it pushes out...wheel trim etc etc..and efficiency at that boost level.I would go with the 16G on a B16...the T25 is too small and you won't even be able to rev it like normal
Detonation...brakes ringlands, sleeves and damage rod bearings and then the rod goes, or making to much power could snap the rod's.
And yes 7psi on a 16G is different than 7psi on a T25...
It has to do with the CFM's it pushes out...wheel trim etc etc..and efficiency at that boost level.I would go with the 16G on a B16...the T25 is too small and you won't even be able to rev it like normal
Thread
Thread Starter
Forum
Replies
Last Post
Alex in Houston
Turbo Parts For Sale
4
Mar 20, 2004 11:26 AM
89dxhunchback
Forced Induction
4
Jul 4, 2003 02:49 PM
2000vsm
Forced Induction
26
Jul 3, 2003 12:08 AM
