HomemadeTurbo - DIY Turbo Forum
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   D16Y7 W/ GSR.. (https://www.homemadeturbo.com/forced-induction-7/d16y7-w-gsr-64121/)

tksavestheday 06-30-2006 06:57 PM
D16Y7 W/ GSR..
 
I have a D16Y7 with gsr throtle body and z6 or y8 intake manifold..
my question is.. would this be any different than just y7 mani and throtle body to work on the engine management? I'm going to upgrade the fuel injectors common ol' 450cc DSM bluetop.. and either AFC hack or standalone hondata. Can someone verify this for me please?

Aloha,

Terry.

ghettoturbo 06-30-2006 07:10 PM
Re: D16Y7 W/ GSR..
 
what are we verifying...does the car run and idle like normal?

tksavestheday 06-30-2006 07:31 PM
Re: D16Y7 W/ GSR..
 
Originally Posted by ghettoturbo
what are we verifying...does the car run and idle like normal?
I guess my question is.. Will this be any different than any y7 or y8/z6. Because it's hybrid? I dont know. First time building a turbo.. So I have many stupid question due to being cautious.

idles @ 800~1100 rpm. it runs good.

ghettoturbo 07-01-2006 04:47 PM
Re: D16Y7 W/ GSR..
 
should be fine as long as all the sensors are hooked up right

samson 07-01-2006 04:56 PM
Re: D16Y7 W/ GSR..
 
Whoa, wait. GSR TB on a Y7 or Y8/Z6? I thought you had to mod some things to sport a B-Series TB on a D-Series mani. Remember the Y7 TB faces the sun and is goofy, not your typical style.


Is it even worth it? Not being smart just saying. Seems like a low budget all-motor mod. :-\


JP

ghettoturbo 07-01-2006 05:03 PM
Re: D16Y7 W/ GSR..
 
im holding a d-series mani with a b16 tb on it right now...as for being worth it, i dont see how a bigger tb could hurt anything unless it was rediculously big

samson 07-01-2006 05:32 PM
Re: D16Y7 W/ GSR..
 
Originally Posted by ghettoturbo
im holding a d-series mani with a b16 tb on it right now...as for being worth it, i dont see how a bigger tb could hurt anything unless it was rediculously big

It'd be a help if anything, but is it worth getting one and rocking it? And do you see what I mean about the difference in the mani types of teh Y7 vs. the Y8? This is a direct bolt on? I thought there was more to it?


JP

ghettoturbo 07-01-2006 05:41 PM
Re: D16Y7 W/ GSR..
 
Originally Posted by samson

It'd be a help if anything, but is it worth getting one and rocking it? And do you see what I mean about the difference in the mani types of teh Y7 vs. the Y8? This is a direct bolt on? I thought there was more to it?


JP
ive never seen a gsr tb...but anyway he said he swapped out the y7 mani already, but the bolt pattern between them and the other d-series manis is the same anyway.problems can arise from the iavc setups on different manifolds though

samson 07-01-2006 07:24 PM
Re: D16Y7 W/ GSR..
 
Originally Posted by ghettoturbo
ive never seen a gsr tb...but anyway he said he swapped out the y7 mani already, but the bolt pattern between them and the other d-series manis is the same anyway.problems can arise from the iavc setups on different manifolds though

Cool. Thank you, buddy. ;) ;D Just trying to learn a little more when I can (especially from the OGs)


JP

ghettoturbo 07-01-2006 11:28 PM
Re: D16Y7 W/ GSR..
 
bah i dont know ----...i just ran outside to look at my pile of manifolds/tbs. im pretty sure the older d-series ---- is different though


All times are GMT -5. The time now is 10:19 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands