Custom Methyl Hydrate/Water Injection
08-29-2007, 06:24 PM
#12
0.5 BAR
Thread Starter
Join Date: Apr 2004
Posts: 144
Re: Custom Methyl Hydrate/Water Injection
if i lower the voltage to the pump there is a longer pause between the pulses. so much of a pause might cause issues with tuning and pre det. id rather get smaller nozzles. ill see how the 100ml/min work right now and then i can go down as far as 60ml/min for each port!
08-29-2007, 06:34 PM
#13
1.5 BAR
Join Date: May 2007
Posts: 749
Re: Custom Methyl Hydrate/Water Injection
You could put an adjustable pressure regulator, or an FMU (which might work better: more water for more boost) inline from the pump to the nozzles. Not sure if it would rust or not 
That way you could let the pump run where it was designed to run.
That way you could let the pump run where it was designed to run.
08-30-2007, 05:20 PM
#15
0.5 BAR
Thread Starter
Join Date: Apr 2004
Posts: 144
Re: Custom Methyl Hydrate/Water Injection
Originally Posted by CSaddict
That is amazing!! Nice work!! You run it off a Hobb switch or something similar?
Thread
Thread Starter
Forum
Replies
Last Post
willahlborn
Forced Induction
1
10-24-2003 04:02 PM
