iwouldhitit

im turboing my crx with b18..and i have a custom mani and it looks like i have to swap out my radiator with a 92civic radiator.but i kinda dont want to do that dues to that EG radiators dont fit good.what manifold can i use so that i can keep my stock radiator?? im using a t3-t4 no a/c

bambooseven

you might have to go the short radiator route. look into ither buying one from an EG or if you can afford it a fluidine for an eg or an ek. that will give you the cooling back that you lost from the half of your rad and look pretty too.

iwouldhitit

will going with the half size rad. really effect my cooling..and how hard is it to fit an EG rad. in a crx? i heard its too tall??

bambooseven

i don't think it would be, just make yourself some custom radiator supports. i'm sure you could use the dinky little thing that comes in my EK

88crxSi

a log manifold would probably clear the 4g rad.. look at what others have done (like the person who owns the car in your avatar )

BlinD

It shouldnt effect cooling much since lots of eg guys use them with their swaps/turbos etc. But I have one from my del sol thats in good shape behind me if your intrested.

hotrex

a hf mani is about the only mani that will clear turbos with the 4g radiator. im using a drag gen 3 mani with a t2 48/60 and i use a 92-95 rad.

iwouldhitit

thanks guys i guess im swapping in a half size radiator..

crx88si- thats my car after i just droped in the motor