coolant soaked spark plug in cylinder #2 only?
#11
Re: coolant soaked spark plug in cylinder #2 only?
while your engine is running, coolant will not go into your cylinders unless you have a cracked cylinder wall like this:
That's what happens to a single cam pushin 26psi with stock sleeves. They just can't take it!
Ran strong for a month (no detonation) Then one day pullin in 3rd gear, Pop! and plooms of white smoke (coolant) but the engine was still running... just like crap.
Shut it off for a few seconds, tried to re-start and it HYDROLOCKED from coolant dripping in.
But if you had coolant in the top where you put the spark plug wire in, that's external.
Your plug may have had coolant on it because when you pulled it out, there was coolant at the bottom.
Coolant level fine? and engine runs fine now? I wouldn't worry about it then.
That's what happens to a single cam pushin 26psi with stock sleeves. They just can't take it!
Ran strong for a month (no detonation) Then one day pullin in 3rd gear, Pop! and plooms of white smoke (coolant) but the engine was still running... just like crap.
Shut it off for a few seconds, tried to re-start and it HYDROLOCKED from coolant dripping in.
But if you had coolant in the top where you put the spark plug wire in, that's external.
Your plug may have had coolant on it because when you pulled it out, there was coolant at the bottom.
Coolant level fine? and engine runs fine now? I wouldn't worry about it then.
#12
Re: coolant soaked spark plug in cylinder #2 only?
Originally Posted by SunshineSketches
you drive with no hood man?
j/k
lifting head would make your water jackets charged with combustion air, coolant wouldn't go into the cylinders...14psi on the coolant system vs. combustion pressure....coolant won't leak in, combustion would go out leading to air pockets, overheating, and pushing coolant.
j/k
lifting head would make your water jackets charged with combustion air, coolant wouldn't go into the cylinders...14psi on the coolant system vs. combustion pressure....coolant won't leak in, combustion would go out leading to air pockets, overheating, and pushing coolant.
#13
Re: coolant soaked spark plug in cylinder #2 only?
Dumb question but do you have the wrong plug wires? I know when my uncle had my car, he apparently put the wires meant for a vtec Lude in it or something... long story short, the boots on the top leaked water down into the spark plug chambers. Just a thought, good luck on hunting it down.
#16
Re: coolant soaked spark plug in cylinder #2 only?
i have had the sme problembut it was from washing the engine bay.. kinda odd how it just showed up there it wasnt on the actuall ignition point of the plug i have had that happen from detonation, the motor was fried.
#17
Re: coolant soaked spark plug in cylinder #2 only?
water around the lead will definitely cause a total loss of spark on that cylinder (easiest route to ground). I fail to understand how coolant got on top of yoru engine though. Now that I understand what you are talking about, I doubt its a headgasket failure or similar.
How does coolant end up there? strange.
How does coolant end up there? strange.
Thread
Thread Starter
Forum
Replies
Last Post
traff1c
Hybrid/Tech
2
05-29-2006 06:39 PM
Turblow
General Discussion
5
05-11-2006 01:53 PM