coolant and oil lines
03-09-2005, 10:54 PM
#2
0.5 BAR
Join Date: Mar 2005
Posts: 93
03-10-2005, 08:06 PM
#3
1.5 BAR
Join Date: Mar 2005
Posts: 723
Re: coolant and oil lines
http://tech.hybridgarage.com/tech/oilcooler/index.html
I found that while doing research on adding a remote filter & oil cooler that can also feed the turbo. A good read if nothing else.
I found that while doing research on adding a remote filter & oil cooler that can also feed the turbo. A good read if nothing else.
03-11-2005, 12:02 PM
#4
1.5 BAR
Join Date: Apr 2004
Posts: 995
Re: coolant and oil lines
I tapped into the oil pressure sensor on the back of my block and ran it to a T on the firewall...
For the coolant, I did like most do and tapped into the line going from the FITV to the intake manifold... it might be kinda hard to see in this picture...
There's lots of other info on this... I just thought I'd add some pics to make it a little easier...
For the coolant, I did like most do and tapped into the line going from the FITV to the intake manifold... it might be kinda hard to see in this picture...
There's lots of other info on this... I just thought I'd add some pics to make it a little easier...
03-11-2005, 01:10 PM
#5
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: coolant and oil lines
Lots of plumbing for little benifits, I've done dozens of turbo setups and have had 0 problems with oil break down due to heat. Most JDM blocks have external oil coolers off the back of the housings.
Just something you may want to keep in mind
Just something you may want to keep in mind
Thread
Thread Starter
Forum
Replies
Last Post
