Comp. housing questioin??
01-20-2004, 12:44 PM
#1
0.5 BAR
Thread Starter
Join Date: Jan 2004
Posts: 80
Comp. housing questioin??
Hey, this may be a stupid question but im not sure. I just got my T3/T04b turbo and I was wondering if the part on the comp. housing that connects to the intercooler has to be pointing down? At this point mine is pointing toward the block. The place i got it from said that if i needed to adjust it I could and I can adjust it to face down but then the internal wastegate isnt fitting right. Im not sure what to do?
01-20-2004, 12:50 PM
#2
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re:Comp. housing questioin??
No it doesnt have to pointing down...it's all about how your piping will line up to the compressor outlet. You should be able to clock the turbo...run a search on 'clocking turbo'
Basically just loosen a few of the bolts and twist...but without pictures that explaination might be worthless to you.
Good luck!
Basically just loosen a few of the bolts and twist...but without pictures that explaination might be worthless to you.
Good luck!
01-20-2004, 02:51 PM
#4
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:Comp. housing questioin??
Originally Posted by xenocron
No it doesnt have to pointing down...it's all about how your piping will line up to the compressor outlet. You should be able to clock the turbo...run a search on 'clocking turbo'
Basically just loosen a few of the bolts and twist...but without pictures that explaination might be worthless to you.
Good luck!
Basically just loosen a few of the bolts and twist...but without pictures that explaination might be worthless to you.
Good luck!
internal wastegate! cant do that!
01-20-2004, 07:17 PM
#7
Guest
Posts: n/a
Re:Comp. housing questioin??
Originally Posted by ghettoturbo
poiting down will most likely work best for you, and you may have to fab up something to hold the wastegate actuator.
