cold air intake/ charge pipe
 

? could u use a cold air intake pipe and rig it at the end so it goes into the intercooler as a charge pipe

Re:cold air intake/ charge pipe
 

yes

Re:cold air intake/ charge pipe
 

when it goes threw the hole where the intake will site just put a 90 and go right into the cooler so just bye a 30 cold air on ebay and use that

Re:cold air intake/ charge pipe
 

its a little on the big side, but yes.. it will work

Re:cold air intake/ charge pipe
 

really wut size is it usally and wut size is recommended too big it creats lag right?

Re:cold air intake/ charge pipe
 

i looked under turbo projects and they 2.5 from thortlebody to ic wut size is the cold air pipe size 3"

Re:cold air intake/ charge pipe
 

measure it in diameter outside diameter i think it's 2 1/2". it'll work.

Re:cold air intake/ charge pipe
 

Most Cold air intakes are 3ins.. like I said, its a little big but it will work.

Re:cold air intake/ charge pipe
 

y did abaz said its too big so it will work that man i dont know wut i would do with out ya

Re:cold air intake/ charge pipe
 

measure it though, ,y old cold air intake was 2 1/2" but there are alot that are 3" outside diameter.