cold air intake/ charge pipe
 

? could u use a cold air intake pipe and rig it at the end so it goes into the intercooler as a charge pipe

Re:cold air intake/ charge pipe
 

yes

Re:cold air intake/ charge pipe
 

when it goes threw the hole where the intake will site just put a 90 and go right into the cooler so just bye a 30 cold air on ebay and use that

Re:cold air intake/ charge pipe
 

its a little on the big side, but yes.. it will work

Re:cold air intake/ charge pipe
 

really wut size is it usally and wut size is recommended too big it creats lag right?

Re:cold air intake/ charge pipe
 

i looked under turbo projects and they 2.5 from thortlebody to ic wut size is the cold air pipe size 3"

Re:cold air intake/ charge pipe
 

measure it in diameter outside diameter i think it's 2 1/2". it'll work.

Re:cold air intake/ charge pipe
 

Most Cold air intakes are 3ins.. like I said, its a little big but it will work.

Re:cold air intake/ charge pipe
 

y did abaz said its too big so it will work that man i dont know wut i would do with out ya

Re:cold air intake/ charge pipe
 

measure it though, ,y old cold air intake was 2 1/2" but there are alot that are 3" outside diameter.

Re:cold air intake/ charge pipe
 

Why measure it? its not like its going to be 3in OD and 2.5ID, lol.. its going to still be huge inside since CAI are made paper thin. ::)

Re:cold air intake/ charge pipe
 

yeah they're realy thin. thank yeee o wise one.

Re:cold air intake/ charge pipe
 

And usually out of Aluminum so welding a blowoff valve flange on could be a trick. Some use JB weld, others can aluminum weld it. And then theres the few that like to use a Coke can mounted in between ;)

Re:cold air intake/ charge pipe
 

or you can weld the bov a bit lower on a steel pipe running from IC to the cold air pipe

Re:cold air intake/ charge pipe
 

for the bov ill just get some one to weld it and for the cold air ill just find out the diamater of the pipe before i purches it i just wanna get all of my ---- one paper then order i think there like 2.5 or smaller cuz awhile ago i bought one it didnt seem that big and i had a 3" ca on my vr6 and the old one was not a 3 in

Re:cold air intake/ charge pipe
 

this is why my piping is like it is...its not overly attractive...but it functions :). I used my old short ram...and some DSM piping...used the flange/pipe that the 1g was on...a few diesel connectors and some clamps...and wam-presto-pieced together intercooler piping :-X