HomemadeTurbo - DIY Turbo Forum - clocking the turbo???

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - clocking the turbo??? (https://www.homemadeturbo.com/forced-induction-7/clocking-turbo-21559/)

superpilun

06-07-2004 02:17 AM

Re:clocking the turbo???

45 degrees from vertical is fine for the oil return

shortyz

06-07-2004 02:31 PM

Re:clocking the turbo???

Quote:

Originally Posted by projekteg

loosen the 13mm bolts (i believe :-\) that hold the exhaust housing to the center section about half way, bang the ---- out of it with a hammer, rotate it, tighten back up, and post you're next question.

uh yeah read his question..

he cant get them all back in if he does that.

hey dood, could u pull it all apart and replace the bolts with studs? that way u can slide it on and put the nuts on with 0 clearence.

sohcrxsi

06-07-2004 03:43 PM

Re:clocking the turbo???

what turbo?

All times are GMT -5. The time now is 02:31 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page