check engine problem
 

ok i have a 95 B18B civic with a T3 T4 turbo chipped with a base map uberdata with RC 440s injectors and walbor 255 the problem im having is that my car has a hard time starting up with the check engine light OFF but when the check engine light is ON it starts up normal. the code that its throw is 6 (water temp sensor). when i drive the with the sensor plugged in the car runs like ----. every time i stomp on the gas the car would barely excelerate and it studders bad than when i unplug it and as soon a the engine light comes on the car run very good almost like how it should. if i get it tune will that fix the problem or is there something i dont know about? it is running very very rich. also i just rebuilt the engine could that have any thing to do with this problem? if someone can help i would really appreciate. just want to drive the car. thanks everyone

Re: check engine problem
 

check your wiring
sounds like you got a few plugs in the wrong place



oh yeah whats the code that might help

Re: check engine problem
 

the code is 6(water temp sensor) and im pretty sure the plug wires is in the right place cause it runs fine when the check engine light is ON. seem like it runs the best when its on limp mode

but ill check the plug wire tomorrow when in the day time

Re: check engine problem
 

are you OBD-1 or 2

Re: check engine problem
 

obd1

Re: check engine problem
 

what ecu do you have P28 P30 P06 ?

Re: check engine problem
 

my bad reading ins't my thing and im high

Re: check engine problem
 

im not sure what year the ecu is but it says p75. but why you ask about the ecu?

Re: check engine problem
 

its all good. your just trying to help

Re: check engine problem
 

who did your bin file for your P75 and who chipped your ecu?