I'm sure some of you know about this, but for those that don't..

Don't spend $10 a piece on Oxygen sensor bungs for your downpipe. Goto your local Pep boys, Hutchins, Autozone, etc. and pick up a 2 pack of Help! Spark Plug Non-foulers #42002 for like $3.50 or so. You just have to cut the threaded end off with a hacksaw and you have 2 ghetto 02 bungs for your ghetto turbo project cheap. You save enough to get the tunertoys adapter (did I mention I love this thing?)

 

you can also go to the hardware store and get a nut with the same pitch for 30cents...

 

how much were the adapter from tunertoys?

 

what is the thread pitch size on Honda/Acura O2 sensors?

 

https://www.homemadeturbo.com/forum/...;threadid=6138

come on misses, it took me 2 minutes to get that and bring it back here.

 

Click the link in my first post.

18mm x 1.5mm

You've found some? Because I sure haven't at about 5 different hw stores so far.

 

i never looked, found a place that had bungs for real 6 bucks so i bought one there.

pretty much all O2's are the same thread pitch...

 

It would have taken you about 3 seconds to scroll up to my first post, since I already linked it from the start.
I try to make my posts as complete as I possibly can and that always includes links to stuff I talk about.