street_kings

Can't find the weld-on bungs anywhere. An exhaust shop around here has em, but for $30...---- THAT!

PureCRXtasy

If you're looking for a quick and dirty o2 bung, goto any auto parts store and get a set of Help! #42002 Spark Plug Non Foulers. They're 18mm which is the same as almost all o2 sensors. You get 2 of them for around $5. You do have to cut them in half though. Otherwise, any 18mm threaded Nut will work. I've seen quite a few turbo places on the web that sell 2 for $10.

Here is a one on ebay for around $7 shipped buy it now.

tranceminister

My cheap *** grinded the one out of my old DC sports header and welded it to my downpipe

street_kings

4.99 HELP! spark plug non-fouler and a chop saw = $2.50 02 Bungs. Thanks1

Chris Harris

http://www.innovatemotorsports.com/x...cat=250&page=2

Any Industrial parts company should carry an 18m x 1.5 nut & bolt as well...

Rev2 9K

I got a couple extra ones laying around you guys can have, let me know (3 to be exact)

leed

Any hardware store that carries metric bolts will have it. I find that the smaller independant stores are better than the 'big' stores for weird ---- like metric.

neil85ae86

carquest actually stock a slim bolt as an O2 sensor bung, only about $2 each. Works great. I had a bitch of a time finding these at industrial places, I struck out. 18mm is common but the thread pitch that you need for a sensor is an uncommon combination.

Neil

turbohf

http://www.atpturbo.com/ they are like 5 bucks apeice, i bought several threw them in the past with other purchase... but i was talking to a local place and he said he would keep some bungs sold threw Holley in stock now....