HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Charade gtti turbo (https://www.homemadeturbo.com/forced-induction-7/charade-gtti-turbo-32227/)

Turbo_Camaro 12-29-2004 08:55 AM

Re:Charade gtti turbo
 
http://www.honda.co.uk/owner/CivicManual/pdf/9-4.pdf
Look for the D15Z3 engine. (2nd one)
This has a HF look.
After that call
Deijne Japanse Auto-Onderdelen
J de Wildstr 7
5408RT Volkel
Tel 0413 273073
Good luck

Pjotr

NNBD 12-29-2004 11:22 AM

Re:Charade gtti turbo
 
Thanks, 0413 isn't far away :D i live about 20km under eindhoven, 10 from the belgium border :)

D15Z3 which car does these belong to ? civic 19** - 19** ?
And the D14 which car does that belong to ?

BTW: I've bought the Mitsubishi turbo. it's a TE04H turbo, with 1st piece of downpipe, lambda sonde etc

but does anybody know what the releasepressure is of the wastegate is ?? stock ?

Turbo_Camaro 12-30-2004 02:36 AM

Re:Charade gtti turbo
 
This is for a 96-00 Civic 1.5
The D14 manifold will fit but hangs to low to mount a turbo to.
Beter look for the D15Z3 (VTEC-E???) engine because this has the best manifold.
I saw one of an old D13 once and it had the same shape as the one from the d15z3. The d13 would be too restrictive.
Good luck with your project.

Pjotr


Semnos 12-30-2004 10:25 PM

Re:Charade gtti turbo
 
14b will work.
It's not that big, actually I find it's small and the eclipse has a 2.0L engine.

racepak 12-31-2004 07:05 AM

Re:Charade gtti turbo
 

Originally Posted by Turbo_Camaro
I'll try and see if any EUDM D14 engines have a HF lookalike manifold.

no dude the d14 manifold is not even close to the hf manifold.
take a look:
http://www.cardomain.com/memberpage/657283/1

i have a d14 on my 97 1.4is and i live in israel.

what do you think of a garrett t15 on a d14?

Turbo_Camaro 01-03-2005 01:51 AM

Re:Charade gtti turbo
 
I didn't know for sure if this D14 had a fitting manifold.
So i looked and found the EDM D15Z3 mani looks like a HF manifold.

what do you think of a garrett t15 on a d14?
Sounds kinda small to me.
What car did it come from?

racepak 01-03-2005 02:31 AM

Re:Charade gtti turbo
 

Originally Posted by Turbo_Camaro
I didn't know for sure if this D14 had a fitting manifold.
So i looked and found the EDM D15Z3 mani looks like a HF manifold.

what do you think of a garrett t15 on a d14?
Sounds kinda small to me.
What car did it come from?

the d14 has the same flange as a d16.

the turbo came from a fiat dublo 1.9 diesel.

surfer 01-03-2005 06:07 AM

Re:Charade gtti turbo
 
A T15 is way to ------- small, Racepak you need to find a turbo from something other than a diesel engined car/van/bus/lorry

Turbo_Camaro 01-03-2005 10:26 AM

Re:Charade gtti turbo
 
These Doblo's have instaspool with a diesel.
If you release the clutch too slow it will have max boost before you even move.
If you want one of a diesel take one frome a 2.8 Ducato or a 3.0 Nissan diesel.
Older Ducato's have a 3K (i thought) and the nissan IHI or garret

racepak 01-03-2005 10:33 AM

Re:Charade gtti turbo
 

Originally Posted by Turbo_Camaro
These Doblo's have instaspool with a diesel.
If you release the clutch too slow it will have max boost before you even move.
If you want one of a diesel take one frome a 2.8 Ducato or a 3.0 Nissan diesel.
Older Ducato's have a 3K (i thought) and the nissan IHI or garret

i will change the turbo few mounths after i'll be boosted i already have the flange ready i just need to buy oil lines. boost gauge. and to make a DP.


All times are GMT -5. The time now is 03:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands