catch can install help. victor x manifold. no pcv valve.. how do I?
#1
catch can install help. victor x manifold. no pcv valve.. how do I?
I have a catch can with two ports and a drain plug, one port in and one port out i assume. I am also running a victor x manifold with no pcv valve. How do i install my catch can to setup it up for proper crankcase ventilation.... the thread here didn't help me much.
#2
Guest
Posts: n/a
Re: catch can install help. victor x manifold. no pcv valve.. how do I?
Your stock pcv valve is connected to a black box on the back of your block. Just take the tube from that box, and run it straight to the can. No need to get your intake manifold involved.
#3
Re: catch can install help. victor x manifold. no pcv valve.. how do I?
are you saying run the tube from teh breather box to the inlet port on the catch can?? what do i do with the outlet port...? vent to atmosphere?
#4
Re: catch can install help. victor x manifold. no pcv valve.. how do I?
well if you are going to vent to atmosphere there really is no reason to have the catch can to begin with, usually people will take a tube from the black box to the can and from the can to the pre turbo intake so that it will suck the same way the stock system does, just make sure you empty your catch can otherwise you will get ---- in your turbo that you dont want
#5
Guest
Posts: n/a
Re: catch can install help. victor x manifold. no pcv valve.. how do I?
Originally Posted by b16crex
are you saying run the tube from teh breather box to the inlet port on the catch can?? what do i do with the outlet port...? vent to atmosphere?
Thread
Thread Starter
Forum
Replies
Last Post