HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Bypass MAP with check valves on 15 PSI? (https://www.homemadeturbo.com/forced-induction-7/bypass-map-check-valves-15-psi-35663/)

Xgenturbo 03-11-2005 10:45 PM
Re: Bypass MAP with check valves on 15 PSI?
 
Originally Posted by silverac
Originally Posted by AbaZ
You can run about 14-15psi on a stock map, and as far as the 3bar map sensor I know alot of people (including myself) has had problems with uberdata & the 3bar maps. WOT its fine, but the injector cut at low speeds 2800ish is complete ----.


I thought you could only run 10 maybe 11 lbs. of boost on stock map sensor.so I was thinking to change my map sensor but if this is true then Im going to turn it up a few pounds.
Yeah, please explain Jeff.

ghettoturbo 03-11-2005 10:47 PM
Re: Bypass MAP with check valves on 15 PSI?
 
it can only read to 10 or so pounds, but will function higher. You just have to richen up the last coloumn from what ive heard, so from the map limit to whatever boost youre running, you will have the same fuel/timing values all the way

crx304 03-12-2005 06:25 PM
Re: Bypass MAP with check valves on 15 PSI?
 
before i had to do my rebuild, i ran 15psi untuned on TE (yes i know that is a stupid idea).... but WTFE the ecu still handled it

Xgenturbo 03-12-2005 07:27 PM
Re: Bypass MAP with check valves on 15 PSI?
 
Originally Posted by crx304
before i had to do my rebuild, i ran 15psi untuned on TE (yes i know that is a stupid idea).... but WTFE the ecu still handled it
Ok so it can be done? The guys who are gonna be doing my tuning say it cant no matter what. I just dont wanna be woried that i'll blow something up


All times are GMT -5. The time now is 12:37 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands