Bypass MAP with check valves on 15 PSI?
 

I'm getting tuned with uberdata and my engine is going to be in in 3-4 weeks, I'm wondering if instead of getting a 3 bar map, Can I just use check valves while tuning with uberdata? will it make a difference?

Re: Bypass MAP with check valves on 15 PSI?
 

no....
wtf


this forum needs a :tard: smiley

Re: Bypass MAP with check valves on 15 PSI?
 

Re: Bypass MAP with check valves on 15 PSI?
 

u want a 3 bar?
50 shipped brand new

Re: Bypass MAP with check valves on 15 PSI?
 

dude over 800 posts and you dont know? you don't need that crap if you runnin uberdata!

Re: Bypass MAP with check valves on 15 PSI?
 

hide boost from an ecu with map tables that read into boost? thats an interesting strategy, tell me more :-*

ps - if your map sensor cant read 15psi, you cant tune 15psi, unless you just load up enough fuel at 12psi or wherever the stock map cuts off to handle the 15, but then you're running it too rich down lower.

Re: Bypass MAP with check valves on 15 PSI?
 

You need a MAP though, cuz the stock honda one wont work at 15 psi, I think stock all I can run is 11.4 psi.

Re: Bypass MAP with check valves on 15 PSI?
 

You can run about 14-15psi on a stock map, and as far as the 3bar map sensor I know alot of people (including myself) has had problems with uberdata & the 3bar maps. WOT its fine, but the injector cut at low speeds 2800ish is complete ----.

Re: Bypass MAP with check valves on 15 PSI?
 

Nice to see im not the only one, ------- 3bar owns me. i wouldnt ever run checkvalves ever again, there crap.

Re: Bypass MAP with check valves on 15 PSI?
 

I thought you could only run 10 maybe 11 lbs. of boost on stock map sensor.so I was thinking to change my map sensor but if this is true then Im going to turn it up a few pounds.