Bypass MAP with check valves on 15 PSI?
03-07-2005, 11:30 PM
#1
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 2,949
Bypass MAP with check valves on 15 PSI?
I'm getting tuned with uberdata and my engine is going to be in in 3-4 weeks, I'm wondering if instead of getting a 3 bar map, Can I just use check valves while tuning with uberdata? will it make a difference?
03-10-2005, 07:24 PM
#6
3.0 BAR
Join Date: Apr 2004
Posts: 9,800
Re: Bypass MAP with check valves on 15 PSI?
hide boost from an ecu with map tables that read into boost? thats an interesting strategy, tell me more 
ps - if your map sensor cant read 15psi, you cant tune 15psi, unless you just load up enough fuel at 12psi or wherever the stock map cuts off to handle the 15, but then you're running it too rich down lower.
ps - if your map sensor cant read 15psi, you cant tune 15psi, unless you just load up enough fuel at 12psi or wherever the stock map cuts off to handle the 15, but then you're running it too rich down lower.
03-11-2005, 12:04 PM
#7
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 2,949
Re: Bypass MAP with check valves on 15 PSI?
Originally Posted by kewbee7
dude over 800 posts and you dont know? you don't need that crap if you runnin uberdata!
03-11-2005, 01:07 PM
#8
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: Bypass MAP with check valves on 15 PSI?
You can run about 14-15psi on a stock map, and as far as the 3bar map sensor I know alot of people (including myself) has had problems with uberdata & the 3bar maps. WOT its fine, but the injector cut at low speeds 2800ish is complete ----.
03-11-2005, 09:01 PM
#10
0.5 BAR
Join Date: Sep 2004
Posts: 191
Re: Bypass MAP with check valves on 15 PSI?
Originally Posted by AbaZ
You can run about 14-15psi on a stock map, and as far as the 3bar map sensor I know alot of people (including myself) has had problems with uberdata & the 3bar maps. WOT its fine, but the injector cut at low speeds 2800ish is complete ----.
