Building my first manifold, looking for a few tips
#1
Building my first manifold, looking for a few tips
I am gonna do my first one in mild steel, save myself some money cause it'll probably end up kinda wacked.
simple question really, wondering what kinda sizing I should do on the tubing.
i was thinking like 1.75" x .120wall, too much wall thickness? not enough? should i go 1.5"?
also, whats the common angle to notch the tubing for the collector?
simple question really, wondering what kinda sizing I should do on the tubing.
i was thinking like 1.75" x .120wall, too much wall thickness? not enough? should i go 1.5"?
also, whats the common angle to notch the tubing for the collector?
#4
Guest
Posts: n/a
Re:Building my first manifold, looking for a few tips
Originally Posted by Stealthmode
1.5" on the runners, and you weld the flange on the manifold at the angle it works best in your car. Test fitting will work.
#6
Re:Building my first manifold, looking for a few tips
Bolt the manifold down when welding it up,put a bevel on every pipe end to get good penatration.And the collector,here.
http://www.honda-tech.com/zerothread?id=1005299
http://www.honda-tech.com/zerothread?id=1005299
#7
Re:Building my first manifold, looking for a few tips
that ht link shows what a bunch of asshats are on ht, and it has a little collector info. hmt= teh best. shitbird makes and sells collectors, yet he still helps people put them together on their own.
#9
Re:Building my first manifold, looking for a few tips