how do you eliminate the surge? all this ---- will do is flutter. its a ssqv @ 5psi. is that not enough boost? is th there some way to adjust?

 

i know when i was running low boost on my type s i had to open it up and take out one of the springs from the inside and there was an adjustment screw to make it looser.

 

I think those bov have springs in them that you can adjust.

if its releasing pressure, then i wouldnt worry about it.

if the compressor is surging then you have a problem.

 

i turned the boost up a little and now it blows off for a split second then flutters. i think it might just be how it works at low boost

 

I had a really cheap knock-off at 7.5 psi and it did the same thing, I upgraded to a real HKS SQV (older design) and it stopped.

 

just loosen the adjustment screw till its almost about to fall out and see what that does.

 

the "adjustment" screw did nothing. well see what happens when i get this ---- tuned next week and can actually make real boost. if its still ------ flutterin an ---- ill buy another. i want a tyre s anyway. ---- it

 

The springs have too much pressure, even with the screw adjusted out all the way. You can pull one of the springs out and it should help it a lot. Basically what's happening is the valve isn't opening fast enough if you're getting compressor surge.

 

joda la agitación.
sólo hace su fusta más única.

 

i dot know why this fucktard even bothered to post. litterallly translated (span to eng) it says:

ode the agitation.
only it does his most only riding crop

what a cumguzzler