HomemadeTurbo - DIY Turbo Forum
Page 2 of 7
1
2
3
4
5
6
7
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   boost is fucking crack! Engine build pics (https://www.homemadeturbo.com/forced-induction-7/boost-fucking-crack-engine-build-pics-51238/)

Mindless 12-02-2005 11:36 AM
Re: boost is fucking crack! Engine build pics
 
Originally Posted by sohcpwr
if your using a dremel, that might be your problem. I used a die grinder with a big carbide bit to clearance. ---- still hurt my hand when i was done. when i look at that pic, it really doesnt look like their that deep at all, but they are. probably about .250"

i cant even give you a better pic, shits all back together :'(
Yeah I wish I had a die grinder but I don't. The dremel did fine I just didn't have the right bits so the block ate them up. I'll swing by lowes this weekend and see if they have some better bits for it. I need to get my ---- back together...I've just been too lazy.

sohcpwr 12-02-2005 11:51 AM
Re: boost is fucking crack! Engine build pics
 
the iorn cyl walls gave a 50,000 rpm snap on grinder and a good carbide a run for the money. if you didnt hit the sleeve yet, ------- give up.

daubleaaron 12-02-2005 01:32 PM
Re: boost is fucking crack! Engine build pics
 
Sweet build, Looks like you got a good deal on the machining. Im interested to see what kind of power this thing makes.

Minor Threat 12-02-2005 01:54 PM
Re: boost is fucking crack! Engine build pics
 
Originally Posted by daubleaaron
Sweet build, Looks like you got a good deal on the machining. Im interested to see what kind of power this thing makes.
Same here, I assume the CT26 is from a Supra, I'm going to be running one on a DOHC ZC in the spring, stock block. Let me know how it flows. IIRC CT26 starts to become inefficient around 18psi, not 15, but that's on a 3L Toyota engine, not a 1.6L Honda. Regardless, 20 psi from a CT26 should rip pretty good.

cloud 12-02-2005 02:23 PM
Re: boost is fucking crack! Engine build pics
 
What tap did you use for the head bolts/studs??

Mindless 12-02-2005 03:02 PM
Re: boost is fucking crack! Engine build pics
 
Originally Posted by sohcpwr
the iorn cyl walls gave a 50,000 rpm snap on grinder and a good carbide a run for the money. if you didnt hit the sleeve yet, ------- give up.
No, it's notched just not enough.

I just need a better bit to take a little more off. The bits that I used were just leftover in my tool box and were 85% dead before I started notching.

G13BT 12-03-2005 04:47 AM
Re: boost is fucking crack! Engine build pics
 
Nice project....

I see your using the Vitara 16v 1.6l pistons, are they a straigh bolt-on?

I mean is the piston pin same size???

That would be great cause it means i could use honda pistons on my suzuki...

sohcpwr 12-03-2005 07:55 AM
Re: boost is fucking crack! Engine build pics
 
cyl head tap is a 10x1.25

yes, vitaras will drop into a honda. but hondas wont go into a vitara, their for press fit wristpins.

Slo_crx1 12-03-2005 11:55 AM
Re: boost is fucking crack! Engine build pics
 
You're right...boost is crack mang ;D Where'd you get those scat rods from? I checked out the scat website the other day, and they had the listings for them, just no prices or anything...so I kinda figured they might be a bit more than what i can afford to spend. I'll probably have to get the TT rods, and more than likey do the vitara pistons as well since i really don't have much cash layin around. Keep us updated when ya rape it...i wanna see how long the vitaras last ;D

robs99si 12-03-2005 12:59 PM
Re: boost is fucking crack! Engine build pics
 
yep boost is crack and I want more than the 11psi I'm running. your build up looks good!


All times are GMT -5. The time now is 06:30 PM.
Page 2 of 7
1
2
3
4
5
6
7
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands