blow off valves
#11
Re: blow off valves
I've done 3 setups using that damn gay generic bov. It doesn't work. I don't think any of them work. The ebay hks super sequential works great though. I'd toss the generic type rs and get a ebay hks super sequential.
#15
Re: blow off valves
I can't really tell what BOV that is, looks like a GReddy of some sort. If it has a set screw on top (which it looks like it does), back it out 3-4 turns and try a WOT pull. Under a WOT release, you shouldn't have and flutter (aka: surging). It should be a clean and crisp release. If the BOV surges under partial throttle, that is normal.
#17
Re: blow off valves
I agree, the 1G DSM OEM BOV is the best OEM BOV out there, IMO. If you crush it, you can hold 25psi easy and efficiently as just about any other BOV out there.
For those not familiar with crushing a DSM BOV, it involves hooking up a vacuum source and pressure gauge and crushing the top hat of the BOV to add more pressure to the spring so that the valve stays fully seated (stock they are partially open under vacuum and begin to fully open shortly after 11psi).
For more: http://www.dsmtalk.com/forums/showth...218eca&t=76629
For those not familiar with crushing a DSM BOV, it involves hooking up a vacuum source and pressure gauge and crushing the top hat of the BOV to add more pressure to the spring so that the valve stays fully seated (stock they are partially open under vacuum and begin to fully open shortly after 11psi).
For more: http://www.dsmtalk.com/forums/showth...218eca&t=76629
Thread
Thread Starter
Forum
Replies
Last Post
ibuyusell101
Forced Induction
7
06-16-2009 02:00 AM
theebluecrx
Turbo Parts For Sale
61
10-01-2007 12:57 PM