blocking off water supply
#17
Re:blocking off water supply
just hook up the lines or don't do anything at all, don't try schemin and filling it with somthing, you will just do damage.
What's everyones favorite line to tee into? The throttle body? I don't like the idea of turbo-heated water flowing through my TB/IM. You guys are all ok with this? Doesn't it heat your charge?
What's everyones favorite line to tee into? The throttle body? I don't like the idea of turbo-heated water flowing through my TB/IM. You guys are all ok with this? Doesn't it heat your charge?
#18
Re:blocking off water supply
It really only takes 15 mins to tap your cooling system. I'll explain the easiest way to do it. Off the bottom of your throttle body or Idle air control valve you have 5/16 cooling lines. These have coolant in them. Pick one.. any one you want really, cut it in half. Now you have 2 lines sitting there, run one line to one side of the cooling section on the turbo, and the other line to the other side of the turbo, In any order, it does not matter which way coolant flows through the center section. Your just putting the Center section INLINE with the cooling system. But if you are really lazy and dont want to, that also works, you dont need to plug the holes on the center section, its an open chamber just for coolant, so nothing will leak out.
Bamboo is right, 3/8's are just to big for my taste..
Jeff
Bamboo is right, 3/8's are just to big for my taste..
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
turbo4life
Hybrid/Tech
10
10-07-2008 06:53 AM