Any jdm d15b's boosted?
#12
Re:Any jdm d15b's boosted?
Originally Posted by Paperchaser013
<~~~ jdm d15b , 5.5 psi.
#13
Re:Any jdm d15b's boosted?
i got 9psi on my d15b in my crx. car runs incredibly hard. im getting dyno numbers on Sat, so ima post em up. im thinking 240+ whp for this one, the car is running extremely hard. i blew the doors off an Evo8 the other day, i shifted 2nd on him and rode 2 cars on it in just that gear.
i did make 130whp all motor, IHE w/ lightened flywheel. at 4.4 psi the car made 190+whp, the dyno was shut down 1000rpm too early on that one.
i will return with a dyno chart. d15b is the best d series since the dohc zc.
i did make 130whp all motor, IHE w/ lightened flywheel. at 4.4 psi the car made 190+whp, the dyno was shut down 1000rpm too early on that one.
i will return with a dyno chart. d15b is the best d series since the dohc zc.
#15
Re:Any jdm d15b's boosted?
#1 Yes which makes it quicker to rev and happier
Compression ratio 9.3
Bore, mm 75
Stroke, mm 84.5
Also keep in mind it has a lighter assembly due to the rod journal size. The journals are the same as a D15B7 which makes the crank lighter as well and results in easier, higher revs for longer periods of time with less stress and wear.
#2 No the z6 and d15b have the same thickness of a rod.
D15B on the left, D16Z6 on the right
#3 Yes, unfortunatly due to the odd sizes they need to be custom made. Maybe with a higher demand (when people realize how potent these little 1.5's are) someone else like Eagle will produce econo rods. Most people run stock internals and never build their engine up. Lets keep this our little D15B secret as they are much easier to find these days and has far less abuse on them. While it does give up 100cc's to a Z6 it puts out the same power rated at 130ps or roughly 128hp (figures at the flywheels before the frictional losses of about 15-17%)
Compression ratio 9.3
Bore, mm 75
Stroke, mm 84.5
Also keep in mind it has a lighter assembly due to the rod journal size. The journals are the same as a D15B7 which makes the crank lighter as well and results in easier, higher revs for longer periods of time with less stress and wear.
#2 No the z6 and d15b have the same thickness of a rod.
D15B on the left, D16Z6 on the right
#3 Yes, unfortunatly due to the odd sizes they need to be custom made. Maybe with a higher demand (when people realize how potent these little 1.5's are) someone else like Eagle will produce econo rods. Most people run stock internals and never build their engine up. Lets keep this our little D15B secret as they are much easier to find these days and has far less abuse on them. While it does give up 100cc's to a Z6 it puts out the same power rated at 130ps or roughly 128hp (figures at the flywheels before the frictional losses of about 15-17%)
#17
Re:Any jdm d15b's boosted?
Displacement, cc 1493
Engine model D15B
Max.power (Net), kw(PS)/rpm 130 ps (95.62 kw) / 6800 rpm
Max.torque(Net), N*m(kg*m)/rpm 14.1 kg*m (138.27 N*m) / 5200 rpm
Power density 7.62
Engine type Water cooling serial 4 cylinder SOHC16 valve
Engine information Horizontal ranging belt driving
Fuel system Electronic fuel injection system (HONDA PGM-FI)
Turbocharger No
Fuel type Unleaded regular gasoline
LEV system (Low emission vehicle) No
Compression ratio 9.3
Bore, mm 75
Stroke, mm 84.5
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 6
Fuel consumption at 60 km/h, l/100km 4.3
If its post 1995 then its a 3 stage vtec 2 vtec lobes and one non vtec lobe
Displacement, cc 1493
Engine model D15B
Max.power (Net), kw(PS)/rpm 130 ps (95.62 kw) / 7000 rpm
Max.torque(Net), N*m(kg*m)/rpm 14.2 kg*m (139.25 N*m) / 5300 rpm
Power density 7.92
Engine type Water cooling serial 4 cylinder SOHC16 valve
Engine information 3stagecVtec horizontal ranging belt driving
Fuel system Electronic fuel injection system (HONDA PGM-FI)
Turbocharger No
Fuel type Unleaded regular gasoline
LEV system (Low emission vehicle) No
Compression ratio 9.6
Bore, mm 75
Stroke, mm 84.5
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 5.8
Fuel consumption at 60 km/h, l/100km
Engine model D15B
Max.power (Net), kw(PS)/rpm 130 ps (95.62 kw) / 6800 rpm
Max.torque(Net), N*m(kg*m)/rpm 14.1 kg*m (138.27 N*m) / 5200 rpm
Power density 7.62
Engine type Water cooling serial 4 cylinder SOHC16 valve
Engine information Horizontal ranging belt driving
Fuel system Electronic fuel injection system (HONDA PGM-FI)
Turbocharger No
Fuel type Unleaded regular gasoline
LEV system (Low emission vehicle) No
Compression ratio 9.3
Bore, mm 75
Stroke, mm 84.5
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 6
Fuel consumption at 60 km/h, l/100km 4.3
If its post 1995 then its a 3 stage vtec 2 vtec lobes and one non vtec lobe
Displacement, cc 1493
Engine model D15B
Max.power (Net), kw(PS)/rpm 130 ps (95.62 kw) / 7000 rpm
Max.torque(Net), N*m(kg*m)/rpm 14.2 kg*m (139.25 N*m) / 5300 rpm
Power density 7.92
Engine type Water cooling serial 4 cylinder SOHC16 valve
Engine information 3stagecVtec horizontal ranging belt driving
Fuel system Electronic fuel injection system (HONDA PGM-FI)
Turbocharger No
Fuel type Unleaded regular gasoline
LEV system (Low emission vehicle) No
Compression ratio 9.6
Bore, mm 75
Stroke, mm 84.5
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 5.8
Fuel consumption at 60 km/h, l/100km
#18
Re: Any jdm d15b's boosted?
long live the good old d15b! i am working on 1 to replace my d15b7, im just a bit concerned on the 9.6 cr might not wanna go past 10psi and tune it just right this bitch should fly. currently the d15b7 runs pretty damn good on 5 psi ---- 2 gears the needle gets to 60 pretty damn quick, i absolutely love it i wanna go 8 psi soon im not expecting this thing to last, the b7 has to go soon lol
#20
Re:Any jdm d15b's boosted?
Originally Posted by Bizzar
Also keep in mind it has a lighter assembly due to the rod journal size. The journals are the same as a D15B7 which makes the crank lighter as well and results in easier, higher revs for longer periods of time with less stress and wear.