Any jdm d15b's boosted?
 

I've been readin around and havent seen anyone with the jdm d15b swap boosted yet. Am i the only one? ???

Re:Any jdm d15b's boosted?
 

Nope...give me TWO weeks guaranteed. Heres my setup thats still under cunstruction and VERY close to completion.

Waiting on : hose couplers and oil line kit from Stealthmode and still in the hunt for a manifold! Probabaly gonna order a log from BMC

Engine Drivetrain:

JDM D15B YO! (all stock internals)
DSM 450 CC injectors
Walbro 255 high volume high pressure pump
SI trans with Quaife LSD

Turbo setup etc:
T3/T04B 54 trim .60 a/r Turbine .48 a/r Exhaust (little big but its really for my built Z6 :) )
31x6.5x2.75 Boost'N Front Mount (way fatter than a JRC, the core is 2.75 thick not just the end tanks)
http://www.alliancelink.com/users/joshsdodge/ic3.jpg
2.5" Mandrel bent charge pipes from UBENDMAN
HKS SSQ BOV
Greddy Profec B boost controller

MISC ----:
DIY Chipped P28 running Uberdata with RS232 port installed
DIY Batronix rom burner
DIY Techedge Wideband 2.0a
Datalogging VIA Uberdata and Tewblog on an IBM A21E 15" screen <--- so nice Got it cheap too!! http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3487653227

Dyno numbers and track times coming soon :) Looking to pump 200whp out of this ol 1.5. Shouldnt be a problem but I don't wanna blow it up....yet lmao. I'll keep you posted on how she turns out. Getting close to crunch time.

Re:Any jdm d15b's boosted?
 

..signing in ;)

jdm d15b vtec w/ jdm S20 transmission, Spec stage3 clutch, ACT prolite flywheel, P28 ecu w/ uberdata

turbo setup consists of:
SSAC manifold (Braced and supported!), Garrett T3 60 trim turbo, Tial 38mm external gate, 3" downpipe/2.5" exhaust/ 1.5" open dump tube. DSM 450s w/ uberdata, Starion FMIC,TurboXS RFL bov, Apexi AVCR, NOS Intercooler fogger system.

http://www.slammdsol.com/newturbo/DSC00011.JPG
http://www.slammdsol.com/newturbo/DSC00014.JPG
http://www.slammdsol.com/newturbo/DSC00019.JPG
http://www.slammdsol.com/photos/newshit6.JPG

Re:Any jdm d15b's boosted?
 

ahhh i see u go to www.boostn.com as well ;) im from PA and met the the owner, hes got some good deals on there. I was really impressed with the d15b stock b4 i did a nos setup then turboed it. I dropped it in my 93 dx coupe and with header, intake and exaust was able to pull down 14.9s and low 14s with a 55 shot. Havent ran it with the turbo yet, still needs a few more mods and tuned even tho it might be sold soon. :-[

Re:Any jdm d15b's boosted?
 

So far I've been damn pleased with it (for the price) On my old JRSC setup I ran a 9.11 in the 1/8 mile down here in FL in the heat of the day. Never took it 1/4 wish I had. Strong revvin little engine she gets real happy in them upper rpms.
http://www.d-series.org/forums/vbgar...getimage&id=27
http://www.d-series.org/forums/vbgar...getimage&id=31

Re:Any jdm d15b's boosted?
 

I am working on mine too. Should be in pretty soon.

HF manifold
14b turblow
JRC FMIC
p28 with uberdata
450cc DSMs
DSM BOV

Re:Any jdm d15b's boosted?
 

god i love del sol seats!

Re:Any jdm d15b's boosted?
 

How are your guys crank case vent system working out for you guys with that filter on the valve cover and stock pcv?

Re:Any jdm d15b's boosted?
 

I have a filter on there right now.. Gets a lil bit of oil in there everyonce in a while.. I have been just cleaning it out once a month. I plan to get a Greddy catch can and run one hose to the valve cover and the other to the intake side by the filter (not pictured).

Re:Any jdm d15b's boosted?
 

Well I am... sort of. :)
D16z6 bottom end with a JDM D15 Head. 8)