HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   another HG question D-seires (https://www.homemadeturbo.com/forced-induction-7/another-hg-question-d-seires-77458/)

DirtydseriesWoot 05-07-2007 09:16 AM
Re: another HG question D-seires
 
lol im using a felrpo head gasket on my d at the moment over 400whp

USS 05-07-2007 09:19 AM
Re: another HG question D-seires
 
Originally Posted by sikcrx89
well i ahve heard all of the OEM ones are mls now.. i judt wonder if its really going to make that big of a diff.. plus i was reading and the hks one bumps compression to 9.9:1 so it may be OEM FTW..
From what I remember the D16A6 has a composite head gasket which sucks big chunks. Many people have made a TON of power on a stock MLS headgasket and headstuds, so I see no need to go with an aftermarket piece.

sikcrx89 05-07-2007 07:25 PM
Re: another HG question D-seires
 
Originally Posted by Snafubmx234
From what I remember the D16A6 has a composite head gasket which sucks big chunks. Many people have made a TON of power on a stock MLS headgasket and headstuds, so I see no need to go with an aftermarket piece.
well i guess its oem ftw then... i am goign to go order it tomm or sometime this week and im waiting for craig at TT to get back to me about my studs..

kablammyman 05-10-2007 02:34 PM
Re: another HG question D-seires
 
the d16a1 (and maybe the dohc zc, im not to sure) head gasket is not metal, its graphite. Thast why people say get an hks mls one for about $115.
Thats too much money IMO, and they are getting harder to find, so I plan to get a copper HG made for about $60.

SpoolinZc 05-11-2007 12:54 AM
Re: another HG question D-seires
 
Is there a web site that has or that is strickly Dohc ZC aftermarket part or just have stock zc parks?, i have searched and searched and cant find nothing

sikcrx89 05-11-2007 06:26 AM
Re: another HG question D-seires
 
Originally Posted by kablammyman
the d16a1 (and maybe the dohc zc, im not to sure) head gasket is not metal, its graphite. Thast why people say get an hks mls one for about $115.
Thats too much money IMO, and they are getting harder to find, so I plan to get a copper HG made for about $60.
like i said somwhere else in this thread i can get an HKS metal one for $111 shipped but it raises compression to 9.9:1..

Racintweek 05-11-2007 03:47 PM
Re: another HG question D-seires
 
Originally Posted by Snafubmx234
From what I remember the D16A6 has a composite head gasket which sucks big chunks. Many people have made a TON of power on a stock MLS headgasket and headstuds, so I see no need to go with an aftermarket piece.


i believe there was a TSB about those HG for EF's back in the day. my old CRX Si had 245k when i took it apart and i believe its was the original carbon/paper HG

Guy-Fast 05-11-2007 05:05 PM
Re: another HG question D-seires
 
yuppers all old school d's use a paper hg

losesomethinbra 05-12-2007 02:11 AM
Re: another HG question D-seires
 
Are DOHC ZC rods stronger than D16A1 rods?

sikcrx89 05-12-2007 07:09 AM
Re: another HG question D-seires
 
Originally Posted by losesomethinbra
Are DOHC ZC rods stronger than D16A1 rods?
they are the same.. the say they are good up to about 250hp


All times are GMT -5. The time now is 02:47 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands