I'm wondering how much it'll cost to complete my kit...
Heres what I have:
1. T25 turbo
2. Saab IC
3. hf manifold
4. misc. lines
5. DSM BOV
I need everything else....any estimates on how much more its gonna cost? its for a y8

 

Umm.....that's a very broad question and for that I will give you a broad answer. It could be between $100 and $3000 depending on what you want. What sort of fuel management were you planning on using?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

And thats also not including a clutch or possibly an ignition retard device.

 

Im wanting to spend about 500 bucks on the rest of it..cause I have 1k and want to spend 500 on some other stuff.

 

Ok, so what were you planning on using for fuel management? I'm sure it can be done with around $500. You just need to figure out what you want. You can spend $80 on an FMU, $300 on an AFC and injectors, or $2000 on Hondata, or whatever you want to use for fuel.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

Ill prolly go afc and injectors....btw I have like $425 upfront, but will ave another 575 soon...so I can just start buying parts..

 

make sure you don't buy before you have money for it, that would be bad and dumb. looks like you need:

management
adapter plate
charge pipes
down pipe

 

if you wanna save money and are handy..make your own manifold that would be $80 in parts if you buy everything. Or go with a HF mani and adapter that's cheaper. The most important in a kit is fuel management. i would recommend a S-afc or chipped ecu for a low budget setup if you want good fuel management. If you're getting $1000 I would put like $300 on the side for a clutch...you can get a good clutch from 88 Turbo Crx for around 200-250 bucks shipped in the US that can hold some serious torque. than you wouldhave $700 to play with and that is more then enough for a turbosetup

 

obviously 7000 for that mdel kit...