Re: 95 TSI AWD Project VGT Holset no 56k
 

Just winding you up man! ;-)

Re: 95 TSI AWD Project VGT Holset no 56k
 

can someone get me measurements of the outside of one of these things? ive been looking at running some sort of vgt for years now but have never figured out a suitable controler for the electronicso now im looking into some mechanical solutions like aero has. i just want to know if i can fit the thing in my car before i spend the money on one. if someone could get the length and width at a few points id appriciate it

Re: 95 TSI AWD Project VGT Holset no 56k
 

Just dishing it back ;)


LARGE... When fitting mine in my engine bay, i measured across the compressor housing(which CANNOT be clocked), straight across the centerline to the comp outlet, it was about 13 inches. The turbine housing is about 11 or so and can only be clocked in increments because of the unison ring position inside the housing. I can get some measurements with pics on monday if you want them..

Re: 95 TSI AWD Project VGT Holset no 56k
 

I can't comment on the Garrett turbo, maybe that is what you are talking about. The Holset ones can be clocked though, on both hot and cold sides. It just requires removing two small pins. Maybe he was asking for garrett dimensions.

Re: 95 TSI AWD Project VGT Holset no 56k
 

This would be pretty cool if it would work with the Holset speed sensor.

http://www.turbobygarrett.com/turbob...ed_sensor.html

Re: 95 TSI AWD Project VGT Holset no 56k
 

TURBINE: inducer=72.25mm
exducer=66.45mm
.9 a/r, stepped 3inch vband inlet and i think 4inch vband outlet

COMPRESSOR: inducer=58.00mm
exducer=81.55mm
.58 a/r. part of the a/r is built into the chra so it is not clockable
next to my current setup
Attachment 11410
vanes closed
Attachment 11411
vanes open
Attachment 11412
Attachment 11413
Attachment 11414

Re: 95 TSI AWD Project VGT Holset no 56k
 

Thanks for the measurments and pics. The hotside is undivided? The V-band inlet is kinda nice, other than not being like anything else.

Re: 95 TSI AWD Project VGT Holset no 56k
 

vband inlet

bitchin'

Re: 95 TSI AWD Project VGT Holset no 56k
 

is that a captain morgan cap on the mt dew?

Re: 95 TSI AWD Project VGT Holset no 56k
 

thats a POS damn pain in the ass 6.0 turbo. me and them are incredibly good friends ive spent many hours under the hoods of those trucks. id like to get some measurements of the holset. im not a big fan of the vband inlet on the garrett to leave that extremely heavy bastard hanging from it.

id like to have the measurements on a holset its going on an H22 hatch so theres not much room to work with. i can already see its almost certain that ill have to build a topmount for it but past that i cant tell without a few measurements.