9.5:1 Slugs + .040 Milling = ---- on 94 pump?
#1
9.5:1 Slugs + .040 Milling = ---- on 94 pump?
I found a great deal on a set of used SRP 9.5:1 slugs, but really need some help/advise on whether or not to get them.
My head was built and I asked for .040 to be taken off because at first I planned on stock compression and that would knock it up quite a bit
Now 9.5:1 and the milling would work me to about 10.2:1 or so correct? Anyway I could double stack an A6 gasket to drop it down a little?
t3 .60/.63, 16psi, 94 octane, budget fully built A6, daily driven on turboedit
Thanks!!
My head was built and I asked for .040 to be taken off because at first I planned on stock compression and that would knock it up quite a bit
Now 9.5:1 and the milling would work me to about 10.2:1 or so correct? Anyway I could double stack an A6 gasket to drop it down a little?
t3 .60/.63, 16psi, 94 octane, budget fully built A6, daily driven on turboedit
Thanks!!
#5
Re:9.5:1 Slugs + .040 Milling = ---- on 94 pump?
Originally Posted by hong lo
anything over 15-16 psi you will start o detonate, be careful. Do you have an exhuast temp guage? This wuold help monitor your ex. temps
#7
Re:9.5:1 Slugs + .040 Milling = ---- on 94 pump?
Ive got an AEM adjustable cam gear, no biggie there
So you guys think pump would be able to hold this sucker without pulling loads of timing?
I figured the compression would be to high
So you guys think pump would be able to hold this sucker without pulling loads of timing?
I figured the compression would be to high
#8
Re:9.5:1 Slugs + .040 Milling = ---- on 94 pump?
yeah, like i said, usdm b16's are 10.2:1 and b18c's are higher. people (including me) boost them every day on pump gas. teh fact that you have forged internals makes it all that much safer/stronger.
#9
Re:9.5:1 Slugs + .040 Milling = ---- on 94 pump?
Yeah I was just being sure it wasnt ***** high for a d16
Anyways, have any info on double stacking a headgasket? Never heard if it could be done
Dont wanna really fork out $100 for a cosmetic becuase Im sure I may blow them a fair bit
Thanks for the help
Anyways, have any info on double stacking a headgasket? Never heard if it could be done
Dont wanna really fork out $100 for a cosmetic becuase Im sure I may blow them a fair bit
Thanks for the help