It is really easy to make it obd0, then if you want to change it to obd1. Wb is a wideband you will needed it to tune .

 

crx si injectors are tah same like all civic / integra injectors 240cc get some bigger ones and get a tune on crome or something or if you dont want to convert to obd1 get turbo edit or uber data whatever is there from obd zero cars

btw love the top mount.. you should of brought the turbo up higher up so it will be on TOP

 

lots of people have told me to buy injectors and a a/fc but cost so mutch and than one guy told me to stick with stock injectors and a fmu it is cheaper but is it good? i dont want to blow it up...... yet next project is going to be a 92 hatch si but for now i have to sort things out i have got charge tube 2-1/2 it is geto but it is working i dont want to start it up with out fuel managment. ya i witsh the turbo was higher cus it is to low for me but oh well. hey thank for all the input guys.

 

cut that oil return line shorter...

 

if you have acess to a low ratio fmu.. like 2.5:1 or 2.0:1 range (not taht ebay ---- 8:1 /12:1) all u need is to go to the junk yard and pull some mazda rx7 non turbo injectors they is 460cc u can actually google the part number on the injector as some of them are low and high impadence.. some 12ohms some 3 or 5.. so drop them in wiht a risistor is needed.. and get ur self a fule pressur regulator and drop your fuel pressure to like 15 or 18 psi and it should idel real good and then when u boost the fmu will take over byu increasing the fuel pressure by 2.5 psi for ever 1 psi of boost pressure and you should have enough fuel but make shure you have a wide band before playing wioht boost.. at lease a gay narrow band keep it on the full rich side at all times.. it should wokr i was gonna do it i have a 2.3:1 fmu form a supercahrger kit wiht a graph and everying for it and i ever got some of them rx7 injectors .. let me know if intereested..

 

i have fixed the return line





so far i have spent 900$ on the whole kit.

 

so geting any fuel management.. try looking for a sds injector controller i ran one of those before really easy to install and use..