406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
http://phearable.net/images/dynochar...yonkesmall.gif
http://www.phearable.net/images/mikeyonkevideo.gif http://www.phearable.net/videos/mikeyonke.wmv Right click the link above & click save as to download/watch the video. STD corrected 407.91 whp 282.04 wht. SAE corrected 397.10 whp 274.56 wht. The vehicle is daily driven with a/c by Mike Yonke of Yonke Racing. Tuning was done by John Vega of Phearable.net (me) on crome pro. The car makes 349 whp 253 wht on 93 oct on 20 psi. The setup specs are listed on the dyno sheet. The turbo had minor compressor surge during the tuning session. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
weak those are corrected numbers.
I never saw on h-t if you answered my question there. Is there anything done to the head besides the intake manifold? |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
its not stock sleeves, you have a block guard.
either way, very nice numbers. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
great trying to selling your services here
we dont care |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
yeah, ---- phearable. I've bashed your good name on other forums as well. You've done nothing to contribute to the DIY ecu hacking scene, you're only out there to make a buck off the stupid kids. Xenocron is our man around here if you haven't noticed.
Congratulations on accomplishing those HP numbers on your mad-tyte JDM whip. If you've stuck around this forum long enough you'll see guys making better numbers on $1,000 beaters with $500 kits. Go drink lacquer thinner fuckwad. Stick to h-t to boast your unimpressive accomplishments. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by quadnie
Go drink lacquer thinner fuckwad.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Xenocron is our man around here if you haven't noticed.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Nice #'s. Looks like that motor needs some TQ mounts :-X
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
thats some terrible ------- music too
why do all dyno vids you see on the net have god awful music. Why can't they have no music at all; or god forbid more MOTOR sounds than shitty new metal. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
pretty gay didnt some kid on here put down 420 something with the same setup ???
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by bitchasscracker
pretty gay didnt some kid on here put down 420 something with the same setup ???
perfect example of the copycat this guy is aka honda-tech user |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
What a fatass :1
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
he should do us all a favor and post a video of him slaming his dick under the hood :y
i heard fat fucks have problems finding there own dicks though so he probly couldnt |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by chris
Xenocron is our man around here if you haven't noticed.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by CSaddict
Why do you think you dont advertise here? That's right....Chris owns you. Drive through.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Notice how he has never paosted again. Now some ricer will post about this brick in a week or so
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
A guy on here (Fast2Cam) made better power on the same boost levels without an intake manifold or an OMFG!!zordZZ~!! Intake Manifold gasket.
Phearable has done nothing amazing. The scene wouldn't change if they left. Xenocron for life. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
You are entitled to your own opinions. I did not bash anyone nor make a comment which would welcome such a large amount of negative comments.
I have been a HMT sponsor in the past without problems. Chris from Xenocron is now the only sponsor related to efi products. There is no reason to bash my company or it's products/services as none of you are customers nor have any clue as to the quality of the products/services phearable.net offers. Moderators: Feel free to delete or lock this post. As far as I am concerned this thread is a waste of my time.
Originally Posted by mike94se
What a fatass :1
Originally Posted by chris
great trying to selling your services here
we dont care The owner of the car asked me to post the video on HMT as he is not computer savy, heck I don't even know if he is a member. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
so thats not ur car :8
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by mtber
You are entitled to your own opinions. I did not bash anyone nor make a comment which would welcome such a large amount of negative comments.
Contact HMT user Stinkyfeet if you want the details of his best friend Brian's JRSC GSR tune I cleaned up while he looked over my shoulder - I'll see if I have a copy of it on my other laptop, the 2D view is obviously a joke since every single scalar is horizontal, NOTHING follows the torque curve on that puppy. Stinkyfeet also got the joy of seeing what the D16 basemap you sold him was putting out, and he also got the learning experience of fixing it on DIY equipment he bought from -------------. I understand everything runs a little different from car to car, but it's pretty ------- hard to ---- up a D16 with common as dirt 450cc, 14B, @8 psi setup - just look at the 1,001 BBKA basemap successes on HMT and the greater interweb, case proven, the end. But, hey, old man Blossfield's D16 basemap pegs the wideband full rich under boost on a volumetrically efficient D16Z6 with IM, cam, short ram merge collector manifold, and GT28RS. Rich to the point he has washed bores, shame the AEM widebands don't read richer than 10:1 because I'm freaking curious how far you missed the mark on that one. I know basemaps aren't supposed to be boosted on, but yours shouldn't even be driven to a tuner on! You're a ------- joke, and I heard it everywhere long and loud before I ever ran up on the three locals with your craptastic and flagrant demonstrations of your complete lack of talent. To quote CSaddict's reply to someone worthy of more respect than you are - go fist a chicken! |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
nice #s....nothing that impresive
and i always get a laugh when i see
Originally Posted by Joseph Davis
go fist a chicken! |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by Joseph Davis
No, but your basemaps are pretty ------- laughable, and welcomes my abuse.
Contact HMT user Stinkyfeet if you want the details of his best friend Brian's JRSC GSR tune I cleaned up while he looked over my shoulder - I'll see if I have a copy of it on my other laptop, the 2D view is obviously a joke since every single scalar is horizontal, NOTHING follows the torque curve on that puppy. Stinkyfeet also got the joy of seeing what the D16 basemap you sold him was putting out, and he also got the learning experience of fixing it on DIY equipment he bought from -------------. I understand everything runs a little different from car to car, but it's pretty ------- hard to ---- up a D16 with common as dirt 450cc, 14B, @8 psi setup - just look at the 1,001 BBKA basemap successes on HMT and the greater interweb, case proven, the end. But, hey, old man Blossfield's D16 basemap pegs the wideband full rich under boost on a volumetrically efficient D16Z6 with IM, cam, short ram merge collector manifold, and GT28RS. Rich to the point he has washed bores, shame the AEM widebands don't read richer than 10:1 because I'm freaking curious how far you missed the mark on that one. I know basemaps aren't supposed to be boosted on, but yours shouldn't even be driven to a tuner on! You're a ------- joke, and I heard it everywhere long and loud before I ever ran up on the three locals with your craptastic and flagrant demonstrations of your complete lack of talent. To quote CSaddict's reply to someone worthy of more respect than you are - go fist a chicken! Since you appear to think Phearable.net's maps suck so bad lets pull up some roms from http://www.-------------/bins/ http://www.phearable.net/misc/xenocronscreenshot.gif http://www.phearable.net/misc/phearablescreenshot.gif I must not know what I am doing..... I have tuned over 130 cars, 80% of them have been forced induction vehicles. Keep talking your trash as that seems to be the only thing you are good for :-) |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Wow, you had those .bin's pretty handy, with already cooked up little blurbs on them. Coincidence? I think not.
You are aware of who and what I am, John Vega, yes? I hound imbeciles across the internet and smash their fevered little egos with a hammer. Do you really care for me to lovingly run my razor tongue up and down you on every message forum on the planet? I am much much smarter than you, I have more experience, and I have more knowledge... I can follow after you like I did JDogg or Ken-doll and correct your every post if you wish it. PS - Woo hoo!! 130 whole cars? Using software I helped develop? You're welcome! |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by Joseph Davis
Wow, you had those .bin's pretty handy, with already cooked up little blurbs on them. Coincidence? I think not.
You are aware of who and what I am, John Vega, yes? I hound imbeciles across the internet and smash their fevered little egos with a hammer. Do you really care for me to lovingly run my razor tongue up and down you on every message forum on the planet? I am much much smarter than you, I have more experience, and I have more knowledge... I can follow after you like I did JDogg or Ken-doll and correct your every post if you wish it. PS - Woo hoo!! 130 whole cars? Using software I helped develop? You're welcome! Because I responded to your post and used photoshop to take screenshots & add text within a few minutes you are accusing me of making things up ? Go download the bins for your self and take a look. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by mtber
AHAHAHAHA that is great...
Because I responded to your post and used photoshop to take screenshots & add text within a few minutes you are accusing me of making things up ? Go download the bins for your self and take a look. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Where did you respond to my post, fool? I pointed out that I had touched THREE of your basemaps that were ill-suited for their intended application, and you have so far said nothing. All you offer by way of defense is to bash another man.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by Joseph Davis
Where did you respond to my post, fool? I pointed out that I had touched THREE of your basemaps that were ill-suited for their intended application, and you have so far said nothing. All you offer by way of defense is to bash another man.
Even if you did have some sort of log, I would be supprised if you did not make up the log to try and make my company look bad. Several members of this forum, including your self obviously have an issue with my company for no obvious reason. If the customer's had an issue with the basemaps, they could have easily contacted me and I would have gladly resolved any issues they had. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by mtber
You have no lamda logs to show that your claims are true, even if a basemap was running rich in boost, it is after all a bassemap.
If the customer's had an issue with the basemaps, they could have easily contacted me and I would have gladly resolved any issues they had. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Insinuating that I am a liar will not get you far, anyone who has spent more than a few hours in my company can attest that I do not lie. That's a few people more than 130. ::)
It's not like I do this for money, and I don't ----- my accomplishments across the internet to aggrandize my ego. I'm some sort of freak nutjob who just genuinely likes cars - imagine that! What ulterior motive do I have to lie in this matter? Absolutely none. What reason do I have for criticising you publicly? Uh, I've stated them, but to make it perfectly clear since you are so perfectly dense: this is one of the handful of places I consider home, and you are not to prey upon it's denizens with your ching chong meow wares; go sell your less than impressive services to the Honda-Bling Farced Induction Forum kiddies, 97% of whom do not deserve to be breathing my air. The sort of people you sell basemaps to generally lack knowledge, equipment, talent to deduce you're a crap artist. The ones with the ability to learn see what they've gotten from dealing with you, see how they can do a much better job themselves, and have no further use for you - they've gladly resolved their own issues. |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Oh, BTW, just so you know... having tinkered with two cars that John at LHT Performance has fabricated and tuned on, which left me far and away really goddamn impressed with the man... I've been referring all the FL kids who ask me for advice to him for the last few years, and I've specifically steered three of those away from you. I believe my history with John includes two anti-iridium spark plug threads on HT about two years back, and I spoke to him on the phone once for seven minutes about Goforth's CRX, which was a FL vehicle before Orlando Rosario bought it on eBay and drove it up here.
I think I'm going to start being proactive and warn FL kids away from you before they mention you. I'm glad to say I have a quality solution to offer them. :-* |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by Joseph Davis
Oh, BTW, just so you know... having tinkered with two cars that John at LHT Performance has fabricated and tuned on, which left me far and away really goddamn impressed with the man... I've been referring all the FL kids who ask me for advice to him for the last few years, and I've specifically steered three of those away from you. I believe my history with John includes two anti-iridium spark plug threads on HT about two years back, and I spoke to him on the phone once for seven minutes about Goforth's CRX, which was a FL vehicle before Orlando Rosario bought it on eBay and drove it up here.
I think I'm going to start being proactive and warn FL kids away from you before they mention you. I'm glad to say I have a quality solution to offer them. :-* Continue your ranting rampage. It is meaningless. I have no reason to waste anymore time on your jabs at phearable.net. If you have a real issue/questions/concerns to discuss with me, feel free to do so via pm or give me a call toll free 1-888-236-9832 |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
phearable.net = owN3d !
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
i get all my maps from xenocrons site, no problems
you charge to much for chip kits btw. dont even have a zif socket |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Ill agree with the crap base maps. I had 2 cars in Vegas that well we will say were simple all motor cars that ran like complete ass. Good thing my dumb ass got the cars running right but then again I dont hype, I know I have plenty to learn. JD created alot of what your tool ass uses to impress H_t users who think its Chrome and that a tuner has to be some super duper scholar. Your just like the rest of the typical hype. Ill be the first to say you are trying to sell parts here. The car pwner isnt internet able huh so he likes hmt but isnt a user. You with about half the posts on hmt in this thread. Just go away and continue to steal other peoples work. Let us white trash building creative bastards be in our world you can go back to yours with simple minded fools who think your cool cause you have tuned a couple cars.
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
OMG, you guys have gone overboard (once again)...at least there was no racism though!!!
John and I are competitors but competition is good and I dont think either of us actually worries about what the other person is doing. HMT is my home and it always will be so thanks for your comments, but the bashing isn't necessary :8 |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by xenocron
OMG, you guys have gone overboard (once again)...at least there was no racism though!!!
John and I are competitors but competition is good and I dont think either of us actually worries about what the other person is doing. HMT is my home and it always will be so thanks for your comments, but the bashing isn't necessary :8 |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
I agree with xeno, all this bashing wasnt necessary. Junk base maps or not i dont think it was necessary. Nice numbers on the civic, you could have made better but ehh.....
|
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by mtber
Right, I am sure the basemaps sucked so bad. Continue with your bull ----.
Since you appear to think Phearable.net's maps suck so bad lets pull up some roms from http://www.-------------/bins/ http://www.phearable.net/misc/xenocronscreenshot.gif http://www.phearable.net/misc/phearablescreenshot.gif I must not know what I am doing..... I have tuned over 130 cars, 80% of them have been forced induction vehicles. Keep talking your trash as that seems to be the only thing you are good for :-) |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
134. 1.8L b18c1, built motor, stock sleeves, skunk2 intake manifold, 2.5 bar map sensor, 60/.63 t3/t04e turbo, inlinepro turbo manifold, 550cc injectors. Street tuned on crome pro at 17 psi on pump. Made 280 whp 229 wht.
Something VERY wrong here.... on 17 psi... w/ a b18c1 vtec engine.... your tune only made 280whp???? AND... how do u know how much power if it was STREET tuned?!?! My d16z6 made over 300hp w/ the same boost levels!!!! :S |
Re: 406whp/281wht Stock Sleeve Turbo D16z6 Video/Dyno Sheet
Originally Posted by IowaTCoupe
134. 1.8L b18c1, built motor, stock sleeves, skunk2 intake manifold, 2.5 bar map sensor, 60/.63 t3/t04e turbo, inlinepro turbo manifold, 550cc injectors. Street tuned on crome pro at 17 psi on pump. Made 280 whp 229 wht.
Something VERY wrong here.... on 17 psi... w/ a b18c1 vtec engine.... your tune only made 280whp???? AND... how do u know how much power if it was STREET tuned?!?! My d16z6 made over 300hp w/ the same boost levels!!!! :S Anything else you want to try and talk ---- about ? |
All times are GMT -5. The time now is 02:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands